Search results

  1. EPCompX2

    Pentair ScreenLogic 7.6 will not connect

    I have the same issue. If you connect REMOTE from home network), it works fine. If I Log out (after a couple of minutes), then connect LOCAL it connects, just this one time. Only way I have found to connect since App update.
  2. EPCompX2

    Natatorium remodel in Western New York

    Nice job... The NanaWall system look awesome.
  3. EPCompX2

    New IG pool- Dig issue

    Spa is 9', not 6'. Tough reading sideways.
  4. EPCompX2

    What did you do to your pool today?

    Windy day in Vegas... What else but fish out $100.00 bill
  5. EPCompX2

    Small Yard, Big Pool Dreams - New Build - Lakewood, California

    Awesome. Do not need any “surprises”!
  6. EPCompX2

    Small Yard, Big Pool Dreams - New Build - Lakewood, California

    Have your overhead utility wires been addressed? I read your whole thread and saw no mention of this.
  7. EPCompX2

    Teribble's Vegas OB Pool / Spa

    They push leaves and dirt to the drains, which were designed to allow leaves through. At the equipment there was a leaf canister before the pump. There were 6 zones with 4-5 pop-ups. The pop-ups on stairs or benches were lower pressure. aamfg.com
  8. EPCompX2

    Teribble's Vegas OB Pool / Spa

    teribble1, In my previous house (Henderson NV) we built a pool and installed an in floor system (A & A) paired with a Venturi skimmer. Our plans were sent to A & A and they placed the pop-ups per their engineering. In the 8 years we had that pool there were no issues, kept the pool clean. I...
  9. EPCompX2

    Imagine having to shock this one!

    This one is in the same area.... http://www.hgtv.com/video/pirates-cove- ... index.html
  10. EPCompX2

    pump humms and trips breaker

    I just replaced one on my 1hp (for water feature) and paid around $50, but could have gotten cheaper on line. If you are not in a hurry, shop around.
  11. EPCompX2

    Intelliflo and Jandy Aquapure 1400 swg

    Lowest I have set is 1650, which uses about 300 watts, and do not have any flow issues.
  12. EPCompX2

    Aqualink with new pool question.......

    I may be wrong, but I think that the "upgrade" still allow you to use the PDA which is waterproof, whereas iPhones are not.... From personal experience!! I just leave the PDA outside by the pool with no worries of dropping in the pool/spa. I am curious how this works, because I am interested...
  13. EPCompX2

    Misting System

    Are you looking to have "personal" mister(s) or are you trying to envelop a patio cover? What is your weather like, if it is humid then misters are fairly useless. I have my patio enveloped with about 45' of misting with a pump for added pressure. It works great in Las Vegas because of the...
  14. EPCompX2

    Controlling an Intelliflo VF with Jandy Aqualink

    +1 I have had the same combo for about 8 months with no issues... There is programming in the PDA where you pick the VS pump you are using. If it was working before you may not have to rewire anything. mcoccia is right though, you need constant power to the pump, the programming will...
  15. EPCompX2

    MGM Grand Las Vegas lazy river pool water test and more

    Re: MGM Grand Las Vegas lazy river pool water test This happened a week or so ago..... http://www.legalinfo360.com/2010/08/mgm ... ns-dozens/
  16. EPCompX2

    Jandy Epump advice

    Update... I have had a VS installed because of my infloor system. I was told that the flow change between zones plays havoc with the VF. I then wired to the Jandy controller and programmed. Been working great for a week or so.
  17. EPCompX2

    Jandy Epump advice

    This is a response I received from Jandy.... The IntelliFlo can be connected to the AquaLink RS PDA with Revision 4.1 firmware by just connecting a 2 wire cable between the pump and the Power Center PCB. I have attached the manual for your convenience. Please see Section 3.3.4. The installation...
  18. EPCompX2

    Jandy Epump advice

    I am also very interested to see how this combo works out, I was told I would need the Intellicom to interface with the Aqualink PDA. I think I prefer the Pentair pump as I have a Wisperflo 2hp now. In Vegas we can get a $200.00 rebate for upgrading to a VS pump.
  19. EPCompX2

    Our little Disney Resort in the Back Yard!

    Let's see the 93 Mastercraft. We have a 90 Maristar that does not get used enough!! :mrgreen: :mrgreen:
  20. EPCompX2

    Anyone Have a Venturi Skimmer?

    sbe, Sorry for the delay. I have 2 main drains and 1 skimmer with the valve between them about 80% main drains and 20% skimmer. My return goes 99% of the time to my infloor which is 6 zones with a total of 26 heads, a small percentage goes to the venturi. I have never had an issue with a dirty...
  21. EPCompX2

    Which Paramount In-Floor System?

    sbe I have A & A with WisperFlo 2hp and have not noticed any pressure fluctuations. I do see that the next zone "opens" (heads pop up) before the previous zone "closes".
  22. EPCompX2

    Anyone Have a Venturi Skimmer?

    Never really thought about it. But I do notice that I rarely see anything floating (including the tennis balls the dogs "throw" in). It really seems as though I get much better circulation as a whole than my previous pool. Hope this helps
  23. EPCompX2

    Anyone Have a Venturi Skimmer?

    We have one on our pool, and it seems to work very well. The only issue I have with it... when you take out the basket , anything falling back into the skimmer gets blown back into the pool. No big deal the infloor works great.
  24. EPCompX2

    Which Paramount In-Floor System?

    sbe I owned a ig pool with a Kreepy Krauly and it worked fine (pool built in '88). My current home/pool was built in '04 and we had A&A installed. The plans were sent to the manufacture and they designed the placement of the heads. This was one of the best decisions we made on this build. I...