Search results

Another update: Replaced the actuator. Turns out the valve problems were related to a clog after the filter, which was fixed, too. All is well now. Thanks all for your help. D911

PC - I'm guessing the spa is "raised". The spa sits above both the pump station and the pool. Are you thinking that the second pump (with Valve #7) is to push that water to the raised spa?? UPDATE: Manually adjusted valve #5 again. Turned on the Spa -which filled with water from the pool. All...

Unfortunately, I have no idea what #7 does. Hmmmm...

How prophetic. I went to manually adjust the valve (#6) to heat up the cajuzzi for later tonight. This is the same routine I'd been doing for a few days. 15 minutes later, I looked out the window and the jacuzzi level was down 12 inches or so. I quickly shut down the system, by-passing the...

Are you sure about this?? The actuators have a big "OFF" opposite the handles, so it looks to me as though valve controller #5 (return to body of water) is set to "pool" and NOT "spa". Thank you for your thoughts. Dave911

OK. I think I see your point. Perhaps #6 valve spits suction between pool and spa, and #5 splits the return flow between pool and spa??

Unfortunately, I really don't know what I have. I'm trying to figure out, but not that easy for me. I am pretty good with pics and photoshop though, so here are numbered pics of the system. Does this help?? THanks for any help you can offer! Dave911

Fun shot, tooo

Ok. Removed the actuator on the pool / spa suction valve and rotated the valve 90 degrees clockwise to get the csjuzzi heated up. Immediately the water level started to drop, so I spun the valve back toward the original position - settling on about 15 degrees. I marked the original pool...

Interesting. Sounds like an alignment issue...I'll try to adjust manually...Thanks! Dave911

The saga continues... I tried the "service mode" route with no luck, so then we had the home warranty fix-it guy come out. He told me the valves were not set properly, and that cold pool water was being sent back to the tub along with hot water from the minimax. When he adjusted the valve, the...

Right. The heater has dials, not a display. I really need to figure out if its the heater or the controller - I think. Perplexing

No error message on jandy rs6. Hmmmm....not sure of next step??

Hi all. Great site!! Situation: heat stalls out at 95 degrees on thermometer Equipment: purex triton minimax heater, jandy aqua link rs6 controller Notes: RS6 spa temp set to max of 103 degrees. Triton heater on spa side set to "high". While sitting in the cajuzzi (as named by kids) I feel the...

Re: New-to-me home. Slow down the waterfall from spa to pool Thank u Blizzle. There seems to be an electric switch on the back off the nozzle. Triggering the switch down doesn't seem to move the valve? Is there a secret to the trigger? Do I need to have the pump off or something? Or perhaps...

Re: New-to-me home. Slow down the waterfall from spa to pool Thanks for the quick response. Yes, the overflow is happening. Can't wait to see that first heating bill...Anyway, I'd like to try your solution, but I'm struggling to make out what's going on with the maze of pipes. I put some...

Hi all - New to the site, so take it easy on me. Just trying to learn... We bought a pool home without any real insight into the workings or features of the pool system, so I'd love some help figgering it out. My current issue is that to run the heat in the cajuzzi (as named by my 4 year old)...

Hi all - I'm new to the site, and looking forwarded to learning a few things... We just bought our first pool home in SoCal area, and I just had THE best day of my life with my wife and kids in the pool enjoying life. No joke. It was amazing. I'll post questions elsewhere, but I'll try to add...