Search results

Adding this here in case anyone runs into the same issue. I found that my old ip range was 192.168.0.x but the new router automatically set the range to 10.x.x.x. After changing this, the Screenlogic started working again. So much for it clearing out its old settings and picking up a new ip...

Good news. I found that my old ip range was 192.168.0.x but the new router automatically set the range to 10.x.x.x. After changing this, the Screenlogic started working again. So much for it clearing out its old settings and picking up a new ip address. Thanks for the input that all provided.

Unfortunately, the old router died without me having its settings recorded so I am not positive that the LAN ip range is the same since all our devices get their ip addresses from the router. I am unable to get into the Screenlogic settings to make any changes to the network settings since I...

Thanks. I am probably going to go this route since it seems like it will be much more reliable.

The handheld remote came with the pool that we built in 2013. That stopped working in 2017 after an electrical storm so at that time we went with the Screenlogic2. Needless to say, everything is out of warranty. I spoke with Pentair yesterday and they said the "firmware is corrupt" in the...

Hey guys, I am wondering what options I have for remote control of our Pentair Easytouch 8. We originally had the Easytouch remote but the receiver died. Then we bought the Screenlogic2 and now that appears to have also died. I am very tired of throwing money at these overpriced Pentair systems...

Did you have any luck getting your Screenlogic to work with the new router? We are having the same issue. :(

I am facing this same issue but so far have had no luck being able to connect to the Screenlogic2 from my PC. Did you have any luck getting yours to work with the new router?

Hey guys, I came back from a weekend away and found that our Pentair EasyTouch remote can no longer connect to the control panel. I have done a lot of research and tried a bunch of things but so far no joy. I talked to a tech at Pentair in California today and I might as well have just called...

Yep. These are actually less than three years old since we had a problem with the original ones that were installed with the pool back in the spring of 2013. Pentair eventually replaced all four units in 2014. All three of them got water inside of the lens and then rusted. I would not...

Hey guys, 3 of our 4 Pentair Globrite lights have died so are going to have to be replaced. I have the new units and am going to be replacing them myself as soon as the water warms up a bit. Does anyone have any tips or tricks on pulling the wires for the new fixtures through the 100'+ of...

Hey guys, I need to plumb in a bypass to temporarily replace the IC40 that is in my system due to one of the couplings breaking on Tuesday. The one thing I am curious about is do I need any special kind of pvc primer/solvent for the pvc pipe? Also...how long will I need to let it dry before I...

Hey guys, I am about to purchase a vacuum head and am a bit confused about what size hose I need to get for it. Our skimmer holes are 2" but pretty much all of the hoses I am finding online are 1 1/2". It appears that since the connector is tapered that it would fit both sizes but would...

Sorry for the delay but here is a couple of pics of the pool at night with the LED lights on.

We have a black pebble plaster pool and LED color changing lights. You are correct in that the light does not reflect off the plaster like it would with a lighter color but we love the effect that the lights create. You are essentially lighting only the water and the pebbles so it is a much...

Thanks! Our PB was Jaida custom pools.

As far as I know there was not an upcharge for the plaster we chose.

We went with flagstone knowing that we will need to reseal it every year or so. I am not sure what kind of sealer the PB used.

Gunite

Jaida Custom Pools

We purchased our volleyball setup from Cool Pool Products out of the Dallas area. They will custom cut the poles to your specifications. http://www.coolpoolproducts.com/gallery.html

And a couple more pix...

Finally done! We are so thrilled with how everything came out. Now the fun begins. :)