Search results

The circulation might be all right now I only have the one jet in that big of a pool I have a facing a little down and straight across from where it comes out I've also added a sub pump to create more of a whirlpool. But that deep end is always pretty much a dead spot. Any ideas?

The cya reading that I'm getting may not be very accurate. With the Taylor test kit I have you use the pool water and then add the region till the black dot goes away the pool water is so cloudy won't that affect my reading? Is there a better kit to test my cya with? And if I need to add more...

I've looked at that thread about how clear is clear . I've had my pool that clear many times just this year has been a real pain in the neck. My pool is 18 years old 26,000 gallon 21x42 above ground with a 8 ft deep end and no drain at the deep end. Keeping circulation has been a challenge I've...

Thank you I will look at that thread. To drain my pool and fill it is not really feasible. I am on a well. And I've never drained a pool before so I don't really know how to do it. But as you said I'll wait till the pool cloudiness is gone / the algae is dead. Then we can go from there. Correct?

Yes I'm looking forward to getting that test kit add on to the Taylor test kit I'm using now. I was keeping it between the three and six mark of the free chlorine. That's why I don't understand how I got algae again keeping the chlorine up there. But after the past couple days on here I think...

Looking at the chart that you sent for the cya versus slam level my cya with the Taylor test kit that I have with seeing that little black dot at the bottom I did it three times and I kept coming up with between 60 70 which the chart calls for 28 on my FC which of course with the Taylor kit that...

Okay now I've read this but I am where I am if you see the other post. I did order the test kit. I guess at this point all I can do is wait for it to clear up so I can see it but the pictures I sent do not do justice they make it look like it's blue it's not it's milk. My liner is 18 years old...

Here are the pictures in the picture it looks Bluer Than what it is it's actually like a milk White that's why I took the one of the skimmer you might be able to see how milk it is in that thank you again

Yes hello once the slam calms down from being all milky looking and I can see the bottom hopefully in Clear Water I will send you a picture of the stains. Thank you again. I'm going to send you a picture of the slam that I did. Can you take a cya reading while you're doing a slam? I figure I...

Thank you so much for your input. I have slammed the pool and letting it run for a few days to do a deep cleaning. I will get the add-on part to My Taylor kit for better test results. I have a question. What type of polyquot 60 should I get and do I add it when the chlorine comes down to...

to keep my chlorine at the level between 3:00 and 6:00 I keep 16 tabs of trichloro s traz four tabs in four different floaters

I'm having a little trouble following this on the site. Again excuse my ignorance I am new. Do I just keep scrolling as people answer my replies?

The test kit is a Taylor k2005. I use the zappit 73 chlorine. On the Taylor test kit I'm getting three to six on my chlorine pH is showing 7.2 the alkalinity is taking 12 drops which makes it like at 120 the test strips that I use from Clorox tell me the stabilizer is between 50 and 100

I use well water but it's through a filtering system in the house out to the hose and into the pool. I had that water tested and it doesn't show but point one in iron

I live in the middle of the Woods. The past 18 years of having this pool the trees have grown to where some of them are actually over the pool of course up about 75 to 100 ft I use a robotic skimmer to keep things off of the top of the pool I run my really nice robot twice a day for things on...

Total iron is 1 Copper is 2 phosphates is 186 order temperature is 81 it is a heated pool I use granular chlorine diluted and I'd rather slowly takes about an hour for me to add it cuz I don't like it the cloud up

You really can't see the stains because it's too cloudy I've done AA treatments before and they have seem to take care of it rather quickly but metal sequestering I don't think has ever been used properly after I slam it and flock it and vacuum it it'll look beautiful except for all the stains.

Please correct me if I am wrong. I have a 26,000 gallon above ground pool that has an 8 ft deep end. Just to let you know what I'm working with. With a Taylor test kit I am showing all my numbers are in line. First I am going to slam it to get rid of some cloudy and I think algae. Then I was...

Hello I'm getting ready to start an AA treatment. Can you help?