Search results

I looked through the install/owner's manuals that came with the unit and I did not find any information about the pressure sensor switch. I did find this online on another pool equipment website: I adjusted the knob as you said and as indicated above, now the heater kicks on with my pump set...

ChrisLPC, thanks for the info and photo! I'll adjust the pressure switch and figure it out.

Thanks ajw22, I'll see how much difference running the pump at 70% makes on my electric bill heading into fall. I will definitely go with a bigger pump when this one fails, which may not be for many years. It's not a big issue, I'm just always wanting to learn as much as I can about the...

Hello, I have a Hayward W3HP21404T HeatPro 140K BTU, it has a minimum flow rate 30 gpm. My Hayward 2.25 HP varialble speed Super Pump XE at 100% is rated at 80 gpm. I run it 24/7 at 45% speed which maths out to 36 gpm. When I turn on the heater it flashes "Flo" meaning low flow rate, the...

I just hooked up my Hayward 140KBTU heater a couple weekends ago. It works great, you can feel warm water coming out of the returns. For us, a heat pump will allow us to start a month earlier next season and keep it going a month later. We were not expecting to swim when the snow is flying, a...

Albuquerque, NM has a frost depth of 20", most contractors will go a little deeper than that just to be safe. Your sail shade column footing should be isolated from your concrete patio or deck or whatever the surrounding surface is. The footing should be at least 2" larger on all sides of the...

I guess we've always refered to them as blackbirds in the midwest. I never heard of grackles until I saw it on here previously when I was searching for a solution. I tried a blow up aligator, reflective tape streamers, and a couple dead blackbird decoys that I moved around the pool deck...

It was blackbird poop sacks for us this year! Our neighbor's trees were infested with an enourmous flock of blackbirds and they used our pool, deck, and patio as their dumping grounds. We were cleaning up three times a day for several weeks. Fortunately the young birds are flying now and...

:ROFLMAO: I almost refered to myself as a "bonehead" in my previous response. Sounds like I'd fit right in those meetings. :cheers:

Ding, ding, ding, ding, we have a winner! Thanks for the observation JamesW, I indeed tested with 25ml not 10ml. Sometimes the obvious isn't so obvious..... :LOL:

Thanks for all the replies! I will order new reagents and see what the results are.

Tested my salt level with Taylor R-0630 and R-0718 and the reading is 9,200 ppm. A couple weeks ago it was 3,200 ppm. No salt was added and my SWG is currently reading at 3,400 ppm. Do the testing chemicals have a shelf life? I'm not sure why there's such a spike in the salt level reading...

I have those plugs for winterizing, but was wanting something that didn't require me to remove; the return eyeball retaining ring, the eyeball, and the eyeball fitting that is threaded into the wall return pipe, then screw in the winterizing plug. All I have to do now is screw in or out the...

So after some brainstorming, this is what I came up with. I searched for some nylon/plastic/pvc nuts/bolts and found, of all things, 1/2" toilet seat hinge hardware would work. I used marine epoxy (uv & chemical resistant) to set the nuts in the return eyeball, installed 3 of 4 in the pool...

My wife would have a heart attach even though it's just a garter snake. :LOL:

After the opossum situation, we got 4 frog logs and placed them around the pool. Hopefully they help.

Our pool was only open a couple months at the end of last season and we had no wildlife visit our pool. So far this year we've had ducks and a turtle we relocated to a lake and some opossums who weren't so lucky. Is this only a spring time occurance? Does it continue through the summer? We...

I have 2" pvc return pipes that reduce at the return fitting to 1-1/2". I have Hayward SP1408 inlet fittings.

Good idea, I'll give that a try!

Hey ajw22, I can't because where I connected the slide supply to the return line is under my concrete patio, *?@!% That Dang hind site got me again, my guess that I'd have enough pressure to feed all the returns and run the slide was wrong. :cautious: I was thinking of something like what a...

Is there such a thing as an adjustable flow return outlet? When I built my pool, I have 4 return jets, and I made the mistake of running the water supply to the slide off of the closest return line thinking there'd be enough pressure to supply the slide. With all 4 returns open, there's not...

We've had lots of cotton, and tons of other little various tree buds blowing into the water. I've spent hours hand skimming and it just doesn't get it all. We just finished mowing the lawn, I had leaf blower in hand, and...... It worked like a charm, I blew all the debis towards one corner of...

Bingo, that's exactly what I did! I started with the closest skimmer, then the furthest skimmer, then the main drains. A bit of trial and error, once I got the first skimmer going I cranked open the next one and that didn't work so good, so I went super slow and you can actually feel the water...