Search results

Thanks, just updated. Restarted slam about an hour ago, no ladder, no magnetic light, all empty as before. Starting numbers are FC-11 pH-7.5, added muriatic acid to lower to 7.2 cya-80 ch-140 last week, Cya was 90, and target fc was 35, now showing target of 31 with cya of 80. I added the...

We have a vinyl pool, 12x24x52, 8400gl. Pool math shows recommended cya 60-90, ideal is 70-80. The FC stayed mostly near 35, dropped to 32 at some times while we were away during the day. I'm going to redo the slam. The pool is not covered, there are no trees in our backyard, and there are 2...

I'm sure I did...took a sample in the evening after sun was down, fc-34, and next morning before direct sun hit pool, still over horizon.....fc-33.5 The only thing different was I started using the 10ml sample after a few days instead of 25ml sample when I started.

Steps and magnetic light were removed. pool math had slam target of fc 35, was at this level or a bit under, never read less than 32, and that was also taking into account a few extra drops from the r0871 that i couldn't get to go full clear in first few days

...so the slam was completed 2 days ago, and the OCLT was just under 1ppm, used a new batch of testing regents..,, I did a final brush, vacuum and backwash yesterday, and woke up to this today. Yesterdays numbers were pH-7.4 cya-80 FC-12.5 CC-0 ch-140 This is starting in the same areas as...

they are stored inside the taylor kit case, inside the house, all testing done inside.

Quick update...I ordered new fas dpd kit, tested and the samples now go to original clear starting color. Tried using the older kit and had same result, staying light pink. The lot of regents i was using expires 10/23, should still be good, but probably going bad a few months early...?

Ok, started using 10ml size, still not going full/original clear water. Should be ok it doesn’t, as long as visible/noticeable change from deep red to light pink? Lg

Hi all, In the middle of a slam, and I’m having color issues testing chlorine levels…. Since the start of the process, I cannot get the pink sample to go clear when adding r0871… I fill up to 25 mark, add 2 scoops of r0870, and sample turns pink/red. I start to drop in the r0871 and about...

So we can then cut the gfci from the cord and replace with either a standard or locking plug correct?

Hello, we are planning to put up Intex 24x12x52 with saltwater pump in the next few weeks. Last year we just plugged into outdoor outlet with thick extension cord. This year we are running a dedicated outlet to the pool from the main panel. Is it better either way to use a regular 20a breaker...

Getting ready to install 24x12x52 Intex, and had following idea for each leg base; Pressure treated lumber 2x8 cut to 15 inch length. True measurement is 1 1/2 inch thick, 7 1/2 inch wide by 15 inch length. 1/2 ground contact pressure treated plywood cut to 16 x 16 inch squares. Nail 2...