Search results

Hi, I've got tricked into having GLASS tiles instead of Porcelain by the dealer and now i'm stuck wondering if I should use them or not - BAHHHH! any experience with these glass tiles? Do they break ez? do they cope well with heating to 40 degrees? Please help. Thanks.

@mas985 hi there any chance for your 2 cents?

@ajw22 hi, I've understood that glass tiles break more easily and tend to wound swimmers more... Is there much to it? I've tried reading articles all over google and couldn't find many non biased ones so I came here🤗

I've got a DIY concrete pool that I've built and I've used epoxy + polyurethane to paint it for the past two years... It all falls apart and now I want to scrape the whole painting and put some tiles... The pool is with chlorine and heated up to 38 deg c - 100f deg, but mostly kept around...

@mas985 For now project is done... wanted to show you how it looks :) THANKS AGAIN AND AGAIN AND AGAIN !!!!!

@mas985 Hi, It seems like it's working with the air blower but I had to set all the water valves to about 1/4 or maybe less... I think I should just get a bigger blower IF I want to get some stronger action... Anyhow - THANKSSSS A MILION!!!!! Would have never manages without you man! If you can...

@mas985 well... All end pipes are cut and just water no air... Even if I route all water to just 1 set ( 2 jets)... Off to physiotherapy and then hipefully I'll manage to get some pipes to complete it for the blower

@mas985 I've only tried 2 - the ones that are the heighest above water level and - not working! Unless you have any idea or something to try I think I'll cut the other end-pipes today as well and try them... then - doubt it will work... I'll connect all 4 to a T made manifold with ball valves...

Editted

Yes! All 4 air lines are separated and 2 are above water level and open for air - not functioning so now when we run the jets their valves are closed cause water is coming out... Here are better pictures of pipes.. I've played with the jets for about an hour today... Removed the nozzles, put...

Well... it's just a straight line from my pump to the 4 exits of the jets... and these are connected as in the images before... Schematic its here: Real images: A video is here: https://drive.google.com/file/d/1s78iEu3BeP7BzKFKp6ABknfpzm8lviK6/view?usp=sharing Really upsetting this thing...

@mas985 Well... I can't run a bigger pump on my electricity... I'll check how can I add a pressure gauge on that pump... anything else I should try without cutting my pipes? their pretty tight so cutting is a big issue... each couple of jets are separated by a valve for water and their air pipe...

@mas985 The nozzles seems like the narrowest part is between 9-10mm. As for the pump - I've got the S2 200: https://www.espa.com/de-en/silen-s2/?especificaciones Pleaseeeee Help! I want some bubbles with my jets ! :cry: