Search results

Jim, Thanks for the advice. I will definitely give it a go, when I have enough time. I'll be out of town for a week, then il lsee what happens. Thanks again.

Jim, I think this is it, it was mounted to the back of the ET. I could have probably gotten a better pic, further out. I will go through the screw and tighten them, maybe that's the reason it's works half the time. It did always work until very recently, that's what puzzles me most.

Yes, I can handle it, thank you for the info I will them a call Monday.

Hello, I am in SanTan, Presidential pools built all this, I am in communication with them to see if they'll look at the IFCS. I am not the original owner, I have one major return from what I can tell that I use for a pool skim device. Also, there are many returns in the spa, that then spill...

Jim, Here is the picture I believe you need, this morning the ET is back to communicating with the pump. I do have that controller for the IFCS.

Jim, Yes I guess it is the IFCS the "jets" im referring to. Only 3 out of ten work. I can confirm that I do have intermittent communication to the pump and Et, because now it is back to no comm, and the screenlogic can't communicate again, what would cause this? I cannot send pump speed at...

Jim, What was happening is I couldn't use the ET, because of the no comm error. I had to use the pump controller, but now its working again so i'm good on that so far. There is no debris on the connection, and it is working again like before, i'm just not sure how all the sudden its working...

Jim, This is crazy to me. I haven't had an issue with the ET in almost two years owning it. I replaced the filter cartridges and all the sudden the ET stopped controlling the pump. The comm cable was lose, so I reattached it and for three days it didn't resolve the issue, but today I went out...

Do you have any tactics to resolve or diagnose a no comm error between the ET and the Intelliflo?

Ok I have figured it out and updated my signature to Intelliflo 2 VST. Can anyone offer any ways to test the connection between the Intelliflo and the ET? I am about to spend 80 bucks on a single cable to see if it resolves the issue and it may not be the problem.

I have a post on here about my ET not communicating, and started wondering which pump I have, to make sure the setting are correct in the ET. I reconnected the comm cable after finding it wasn't plugged in all the way. Still doesn't work, screen logic lets me turn lights on and the booster pump...

I can't determine if this is Intelliflo,vs or vsf, or superflo. Part number is 356928.B All I can find are other model numbers. And, it doesnt say on any documentation I have.

Yea I will fix that! I have the pump I the pump in this picture and in the ET settings it's set VS. It does show no comm in settings pump status. Can you tell me common name to this pump I have? I don't see vs or vf on this label.

I was thinking that could be the problem, but I can even fit my foot in there because it's so tight between the plumbing. We did have monsoon winds and I wonder if that caused it too. It does plug in and there's no water damage, no not sure how nit would just be defective, unless they regularly...