Search results

sorry for late response.... Alkalinity tested with TF-100 and PH tested with k-1000 Thanks, brian

Hi, my PH is 7.8-7.9 and my alkalinity is 30.... how do I lower PH and raise alkalinity? Thanks, brian

Old Post but wanted to update.... I converted to SWG 9 years ago. The screws holding up the liner track were rusted(as was suggested by the group here). Purchased new liner and installers agreed to re-screw in the whole track with stainless steel screws.... Getting the new liner in 2021 was so...

Any videos on the web for fixing this? Contacted two pool places and there not interested... Thanks, Brian

Thank you so much for getting back to me!!! 1" at the widest part of the gap. Do you want me to take closer pictures?

its the metal behind the liner that is sagging?

Hi Guys, in-ground, SWG pool. The top of the liner(metal behind the liner) seems to be sagging. Is this a DIY or do I need to call in a pro? Was thinking of just putting peelable siicone in there to keep water out for summer, but never encountered this before. Thanks for any help! Brian

Valve still going strong....

I'm just looking for the nuts, bolts, and bushings. the bushings are the hardest as if you look at poolslide2 picture, you will see i tried to use a rubber stopper with hole in it, but not really what should be used..

I have an unidentified pool slide from the 90's. Looks like the same one i had as a kid in the 70's. There is no identifying markings on it. I need to replace the bolts and some type of cork\rubber bushing connecting the rail to the slide. Have searched but no luck... any info would be greatly...

Ok, just wanted confirmation. Thanks!

Hi, need to replace my T-9. Going to get a T-15. Should I just stay with Hayward at the premium price or are there reputable dealers with cheaper replacements that people here can recommend? Thanks! Brian

thanks guys!

I need to buy a new pump. The old was a Hayward 1.5hp. On amazon, a 2hp is only $60 more. Is there any advantage to paying extra and getting the 2hp? My pump is wired at 110v. Thanks, brian

because I would have to dig about 30 feet and 7 under concrete.... Thanks for the reply! Brian

Been toying with this idea for a a few years. Pretty much given up due to cost. Instead of solar powering a DC pump to run water down slide, do you think a 12v deep cycle battery, wired to pump and use a solar panel to charge the battery. An on\off switch to only circulate water when in use...

update - found them at lowes 4x for $2.97, needed to use two do to length, but work fine....

Hi, need the spring(GW9522) and I see it for no less than $15. I know $15 is not a lot, but it kills me to pay this for a simple spring. Has anyone matched one at a home depot or lowes? Anywhere else I might be able to pick up a simple, comparable spring? Thanks, Brian AKA "El Cheapo"

T-9 still working strong. Have it down to 30% and 4-4.5 ppm chlorine this morning. Returning t-15, due to warranty concerns... Thanks for all the help!!! Brian

no OCLT last night... This morning before starting pool FC 4.0

water is crystal clear. only thing, we have been getting bad thunderstorms last couple of days. will OCLT tonight to verify numbers again.....

OCLT results last Night | this morning FC = 7ppm | 5.5ppm TA = 85 | 75 CYA = 45 | 45 Pool ran for 12 hours, sample taken 3 hours after pool shutoff. I'm guessing my cell is working fine now. will still try to get CYA up... Thanks, Brian

update - purchased a t-15 from Hayward. Restled with buying a non OEM, but finally said I don't want to gamble. Before I took the cell to the pool store(where they said it errored), I cleaned it with straight white distilled vinegar. After the pool store, I took it home and installed it. It's...

carl292\Ltmoeller - how has the unit performed? Nervous about 1 year warranty.... Thanks, Brian

Took it to local pool store and the store checked the cell and it errored right away twice.... tried to sell me a t-cell-15 for $630.00 + tax.... Thanks, Brian

Sorry for not getting back to the group. when I went to check the system the other night, I was getting check cell and low salt indicators. I have added more salt and have it up to around 3100. My cell numers are different now too. It's definitely producing chlorine, but I beleive the cell is on...

I will do an OCLT tonight and report back in the morning. Strange, the Cell has worked and supplied chlorine for 3 years now, running for 8-10 hours a day.... Thanks Brian Ps - now time to take out a small loan to buy a t-15, lol