Search results

It's a Jandy AquaPure.

The pump runs 12 hours per day normally. The last several days I have had it running 24 hrs due to the beginning algae bloom. The testing has occurred during system run time. The readout on my remote indicates that I have 2700ppm of salt. The pool calculator recommends adding 42lbs. I will...

I just ran the chlorine test today again. FC: 0.2 CC: 0.6 With the SWG set at 90% (and clear of all buildup), should I assume the cell is bad?

I drained about half of the water and just refilled it. Because of the algae growth, I did put some bleach in. Here are the results: FC: 0.6 ppm CC: 1.2 ppm pH: 7.8 TA: 160 ppm CH: 510 ppm CYA: 60 ppm

I think the actual value is probably near 100ppm. The diluted test result was 50ppm. Doubling this value is 100ppm. That's how this works right?

I have the sump pump in the pool and am draining it 1/2 of the way.

I diluted the water by half with the tap water. The doubled result is ~100ppm.

Well, the K-2006 took much longer than anticipated to arrive, but it is finally here. I went out and ran the battery of tests. Here are the results. CC: 0 FC: 0 pH: 8.0 TA: 130ppm CH: 630ppm CYA: 115ppm (extrapolated) Original problem involved scale problems on artificial (painted) stone and...

Ok. Gotcha. I am in Tucson (Vail really) as well. For a store test, which pool store would you prefer?

That is what I understand. I have a K-2006 on order, but it won't arrive for a couple more days.

Will do. I will drive into town tomorrow and get an analysis done on a sample.

Good evening pool friends. I am hoping that I can pick your brains for some guidance about an issue I am having with my pool. My wife and I purchased our pre-owned home 6 months ago. The home came with an existing pool that was installed anywhere from 3-5 years ago. It seems that the pool...