Search results

I have an older spa and Im trying to identify this valve. Its from a Coleman/Maxx spa and it goes to the neck jets I believe. I'm not sure if I can just buy the top portion or do I need to replace the entire fitting. I just cant tell if the internal piece is missing or its broken off.

Well I have an old raypak 2100 and I was expecting trouble getting it fired up this year since last year it wouldnt fire. This year lit the pilot light, flipped the switch to on then turned up the thermostat and it fired right up. Now I flipped the switch off and it didnt shutdown. I didnt wait...

What is the weight of a standard 4x20 solar panel filled with water? I live in Michigan and I believe I could fit 4 panels on a section of my roof. What average sort of Temp increase would I see on say a 80 degree day?

Just bought a new clear 12 mil solar cover from in the swim and its a foot too wide and a lot thinner then the last one :hammer:

Will a 1 hp pump be enough to lift water 9 feet to supply solar panels?

Is there one Intermatic timer that can be used to switch pump speeds and run on a schedule?

So I got my light a bit too late. Im replacing a aqua lumin with a aqua lumin III. I need to attach it with 4 screws and pull the wires through the center 3/4 hub hole. How to I make the hole. Ive read its best to cut an X. Should I drain the water to below the light? Just a little paranoid.

Im in the process of setting up a zwave network and would like to automate my pool pump. I just have a simple pool setup just a 2 speed 1hp pump that runs on low almost always. Any recommendations on a switch. Found this http://www.smarthome-products.com/p-654 ... odule.aspx

I see a lot of issues VSP pumps having air at a lower RPM. Would that also affect a 2 speed pump. it has an air bubble constantly at the top. I just replaced the motor on my duraglass with a 2 speed.

Anyone have a link to a diagram to what connections I need to make with my old cord to have this new pump run at the low speed only. Only reason I'm doing this is because I have no use for the high speed until the end of summer when I get my skimmer fixed.

Not sure if this is the right area to ask. Pools getting filled tomorrow with city water so a small amount of chlorine will be present. Im zip out of chemicals so based on my pool size what should I go pick up?

I have a old set of fiberglass steps Im looking to paint and clean up. Can anyone recommend where I could find new trim? They don't have a label anywhere. Also what could I use to fill in some small cracks and what paint would be recommended? Thanks! :goodjob:

Is Aqualumin the only niche less light. Since we are having a new liner installed I was gonna replace ours we have a gen 1 and it has some sort of issue every year.

Sta-Rite system 3 modular media pool filter? Found a deal, just not alot of info on this one.

I have a inground 16x32 pool with a crystal flo sand filter says model T-170BP-1 says 150lbs sand capacity. My pool is roughly 22500. Should I upgrade? Seems like the turnover is about if not exceeding 12hours

Just picked a liner for our pool does anyone have http://www.glipoolproducts.com/assets/keywest.jpg this liner or a similar one? Im second guessing my decision :oops: Oh or maybe some pics of http://www.glipoolproducts.com/assets/oceanbeach.jpg or something that has a tile like pattern? Thanks...

Well I believe I have found a reputable installer for my liner. He warranties his work and carries GLI liners with the gold warranty. He will be out Saturday to give me a quote. I had a question though I just pulled the winter cover off yesterday and noticed a huge tear in the deep end which has...

I'm looking to replace my pool liner this spring and have been searching for a reputable online company. Can anyone recommend a company they went through for an inground liner?

Can anyone recommend where to buy a new in-ground liner? I have a 16x32 in-ground. Looking to order the new liner in just over a month. Budget is $1000.00. Thanks! Jordan

Hopefully Im posting this in the correct area. I finally was able to remove my main drain cover and now that I know the size(american products 6 1/2 inch overall diameter) I cant find one under 42 dollars? I just feel like thats alot of money for 2 screws and a piece of plastic :rant:

Is there a Average Size Main Drain cover? I need to replace mine, but I wanted to order the new one first. Its a round one. Heres a bad pic but maybe someone would have a good idea

I just purchased a solar cover form PoolSupplyWorld 12 Mil clear(very nice quality might I add) and I need to know how to attach it correctly. I have the reel and it has white straps with plastic screws on the end of them. The cover that was on the reel when I moved in to the house was destroyed...

Im sorta worried about my solar cover order from this company. Ive seen some positive reviews on this company but everytime I live chat with them on my order I get a different story. My order went from 3 to 4 days to possibly 7 days and two days ago they said yesterday I would recieve the...

I want to add a couple lights to my shrubs to give them a green glow.(Everyone's night pics look amazing!) Should I use a flood light or spot light style? Also how many watts ? So many options I just have no idea.

I have a Aqua Lumin 1 and it wont stay on. It is a 120 volt and its not tripping the GFI. The bulb contacts look good but there looks like a little white tube that might be a vent looks a little brown maybe burnt near a silconed mass of wires. Can I open up that silicone and check those wires or...

Okay so I was just looking at my heater and I noticed when I turn on the gas shut off before it, I smell a gas right around the valve area. I of course shut it off but does that mean the valve is bad or do i have options for a fix?The valve is in the off position when i notice it.

Can anyone tell me the difference between these 2 units besides looks? I'm becoming quite indecisive on what pool cleaner I'm going to buy. Also been watching what YouTube videos I could find. The Aquabot Turbo T Jet seems to have awesome suction just no scrubbers which I think I can live...

Anyone from Michigan use a Solar pool setup? Whats a rough price for an entry level setup? I have a raypak 2100 but its costly, wondering if my money would be better spent on a solar setup.

Looking for a 12 mil silver or clear, anyone recommend a place?

Has anyone tried to build some sort of heat re-claimer to sit over their pool heater? Seems like alot of heat is wasted.