Search results

Yeah it is hardwired to intellicenter. I am using a skimmer vacuum for now. Thanks for follow up.

So my intellicenter fuse blew out and I am waiting for pool services folks to come in and fix it but everyone’s backed up. I am able to operate the pump manually using the pump keypad, It’s an intelliflow vsf pump. I want to operate the Polaris pressure vacuum cleaner as well but I don’t know...

I am trying to connect with pentair but it has been difficult to connect over the phone , will keep trying. For now I am manually operating the pentair pump using the pump keypad. But don’t know how to turn on the pressure Polaris vacuum. Showing the picture of the vacuum pump - is there a...

I turned off breakers and then was able to push it back in and then turned on breakers and it reset again. So I think you are saying that the input power is bad? So this is for an electrician to look at Or could this be a pool technician? Could there be a blown fuse on the IntelliCenter ?

Thanks, I got the taylor kit and saw that the CYA level was very high. I've stopped the chlorinator and since then used liquid chlorine to SLAM the pool and have had good results so far.

The pentair IntelliCenter stopped working and is not powering on. The display is all black and not responding to touch. I turned the power breaker on/off. There is power to the pumps, valves and heater and was able to turn the pump on using the pumps keyboard. I am attaching a picture, there is...

I noticed that the chlorine tablets ran out on the chlorinator and I filled them back up a couple of days ago. Today I noticed that some brown spots on the pool surface. Fc is 2, cc is zero. Ph is 8.2 and alkalinity is 180 There has been a fair amount of pollen on the pool surface. I did...

I tried sandpapering the notch so that it fits the lid but didn’t help - can’t rotate 180 as the handle hits the pipes. Also made sure there is no wet leaks from union. After taking a closer look at the pump housing, I noticed what looks like a small hairline crack inside the housing, I can...

Ok, cleaned the lid mating surfaces and closed again. Adding a few more pictures of the leak , pool bubbles and nearby surfaces. It is always leaking at the same spot - near the union area ( but no wet trails leading from union). I don’t see any cracks on the lid. Any ideas on how to find the...

So the union looks good - I unscrewed it , the seal is good, I lubed it, put some plumbing tape and screwed it back in. So looking at it more closely, it does look like the pump lid is leaking, it is also pulling in air and I can see bubbles as well in the spa. Any idea on how to fix this...

By union/connection , do you mean the white tube with the black ring around it in the picture. That would make sense since that’s where I see the water. Let me take a closer look - I could never spot the exact leaking point. How do I take it apart ? Try unscrewing the black ring?

The chlorinator tube fix worked - no leaks there. But pump lid still leaks - tried lubing the oring and tightening the top cover. Should I try replacing the oring? I don’t see any damages on the oring but it fits loosely in the the lid and does slips out easily. No cracks on lid or pump housing...