Search results

I have a Dolphin T35 that will only move a couple of feet in each direction and struggles to stand up and climb the wall. I’ve checked the voltage on the controller and also the cable. Any ideas? Also, any recommendations for a replacement robot? Thanks!

No, it has never done this until recently.

I have a Intellibrite 5G 120v Color LED pool light. The issue I have is when I turn it on it flickers on and off 4-5 times and then works normal after that. Any ideas? Thanks

Are you sure the flow switch is turned to the right direction when installed? It has an arrow on the top of it that shows which way the water should flow through it to make the no flow light go out.

A.O. Smith 1 HP Full Rate Two Speed Motor W/ Timer - Round Flange (B975T,B2975T) - INYOPools.com I'm considering replacing my 1 HP Super Pump motor with this. Any thoughts? Thanks

pH-7.2 FC-2 CC-0 TA-110-120 CH-70-80 CYA-35-40, have added 8lbs since opening when reading was zero. Any advice? Thanks

Having a problem keeping algae away. I keep FC between 4-6 and CYA is 60-80. We have had some rain and haven't swam in 4-5 days and I keep it covered with a solar cover. When I take the cover off you can see algae in the corners and creases of the deep end and also some on the deep end floor. I...

Can't you achieve the same thing by using non-chlorine shock to destroy the chloramines?

Yes, messing with the calculator now. Seems pretty straight forward. Thanks for all the suggestions!

I used 8 pounds on pool store recommendation, haven't played much with the calculator to be comfortable with using it yet. Water looks nice and clear!

I've been a lurker for years but never really embraced the BBB method. Looking to do this more on my own without pool store help. Looking for support from the forum.

Water Temp 75 FC 2 CC 0 TA 80 CH 70 CYA 20-30 added eight pounds 3-4 days ago, finally starting to register. pH 6.8 Thanks!

My CYA reading shows zero. I poured 5 lbs in a sock yesterday and it dissolved, shouldn't I have some sort of reading by now? Thanks

FC-.5 CC-.5 TC-1 pH-7.2 TA-100 CH-80 CYA-0 SALT-3100 Thanks

Have a SWG and the ladder and railing anchors are corroded. They were made out of aluminum and I want to replace them with bronze. Any tips on getting the old ones out or any other info? Thanks

Getting the phosphates down will help your algae problem.

Water Test Got my water tested again while I wait for my test kit arrive. FAC 1.5 TAC 3 pH 7.2 TA 80 CYA 40 CH 140 Salt 3000 No Iron or Copper No Phosphates Any thoughts? Better than last test on Sunday.

Looking to upgrade to the 2 speed super pump. I have the EC-65 filter and the poly base that the pump mounts to. I want to stay with the super pump so it can mount to the base. I also have a SWG, will it make the flow switch on low speed? Any advice or recommendations would be appreciated. Thanks

Ok, I sent you a PM maxepr1. Will be posting results soon. Thanks

Ok, just placed order for kit. Should I just shut my SWG down for the time being? How long will this take to clear up once the kit arrives? Thanks again!

Ok, I am ordering it now! Should I get any of the options they offer? Thanks so much for the help, can't wait to get this issue resolved!

Can I buy the TF-100 locally or do I have to wait till it ships?

My water is crystal clear. Just won't hold any free chlorine. My pool is 22,500 gallons. I just checked it again and it shows no free chlorine! About to throw in the towel!

Alright I shocked the pool, FC went way up. It has been falling over the last 3 hours. It is currently .5 or 1. I added a gallon of stabilizer also. Hopefully the SWG will keep up! Any other advice would be appreciated. Thanks

Vinyl pool....I have always used Aquacheck and never had any problems for 5 years. I have had salt generator on super chlorinate since Monday. Should I add the stuff I bought to shock it? Thanks

So the stuff they sold me won't help? What should I test for when I get a kit? Totally lost on what to do next! Thanks

Went to Leslie's today and got water tested. FC 1 TC 2 Salt 2900 CH 90 CYA 40 TA 70 PH 7.6 Copper 0 Iron 0 Pho 500 They also checked the salt cell and it passed. They said I have Chloramines and sold me 6 1lb packs of power power plus? Any suggestions? Should I go ahead and add all 6 packs? Thanks

My water now is crystal clear. I am wondering if the SWG has gone bad? I put a strip by the return and showed nothing. I also took the cell out and put a strip their with no results. Is their anyway to test a cell? It is going on its 5th season. Thanks

I don't have any test results. The place I went to only uses strips and tested the phospahates with a powder mixed with the pool water and it turned a dark blue. I will go somewhere else tomorrow where I can get a print out.

Help! Opened pool Monday, added 4 gallons of shock and stabilizer but couldn't get free chlorine to show. Went to have water tested and they said I have high phosphates eating the free chlorine? Gave me two pint of Orenda PR-10000 and told me to super chlorinate. ( have a SWG ) once phospahates...