Search results

First they screwed up the pool ladder now the deck jets. I just chose the wrong paver company. Thanks for all the info.

That’s what I thought. Thanks

are they supposed to be glued to the pvc hoses?

1/2 inch to 3/4 or a inch . Based on the water line? Had it on for about 3 hours only. Seams excessive. Even for splashing water. I wonder are they connections of the flex hose are supposed to be glued or just stuffed into the hub. Because I don’t remember them using pvc cement

I just had my pavers installed and had the deck jet hooked up. Every time i use the. I notice a drop in my water level. Is that normal? Or did they make a bad connection? I don’t notice any excessive moisture around the jets or the ground around the jets? Any suggestions?

Mine is a year old and like new, I give it a good hose down after it goes in the pool. And store it in a shed over the off season. Don’t know why yours is in rough shape?

Well I was right they got cement in the cylinders and all over the wedges took them two hours to remove the ladder and chisel out the cylinders to make sure they were debris free probably going to order new wedges just in case they were deformed turn the process The owner said that in 30 years...

No the pavers were fully installed then they installed the ladder the next day. I wanted to check to see if it can get it in or out before I settle up with them. Good thing I did.

Well flushed with a power washer and blew it out with air several times. Wedges still not budging. I have a feeling these clowns might of cemented it in or something. I’m called the pavers company let them figure it out because i still have to give them the final payment after they replace a...

I’ll give that a try if the air and water doesn’t work.

Ok will try.

Just got pavers and pool ladder is stuck. I tried tapping the bolts to loosen the wedges remove the bolts and won’t budge. I beat it with a rubber mallet. Hit the screw with a metal Cole chisel and a 2 lbs hammer. I have no idea why it’s so tight unless some cement got in there. Any ideas...

It’s leaking from the top. Under the handle. And yes I greased the spider gasket. I’m thinking maybe i reversed the O-ring abs the plastic ring clip?

At the end last season I changed spring on the Handel of my mutli port because it was getting weak. I ordered a new gaskets and o-rings what ever I saw on the diagram. Well i must of missed something because it is leaking when I opened up my pool today. Any suggestions

Found it https://bungeeplug.com/

I tried to find a video also I guess I’ll keep looking. Thanks

Can you take out the fitting and pore something into them?

I been thinking about getting some duck fitting for use next year. To help blowing out the lines and I discovered these also. Anyone use these or familiar with them. Aqua Group BP15 Multidirectional Bungee Blowout Plug Amazon.com : Aqua Group BP15 Multidirectional Bungee Blowout Plug : Garden...

you might have the same setup as me, the bottoms are not drains there returns, I just blow them out and air lock the valve.

I have the stuff With purple primer. I wasn’t sure if that would hold enough. I remember they used some blue tinted glue.

I want to redo some things at the end of the seasonAny specific glue or primer recommended to re do some plumbing and unions?

Nope, still the same color I maybe too much in the sun? put my unit away in the pool shed so It doesn't spend too much time in the sun. But I have a question does anyone do anything different besides rinse the unit with water after use? like use soapy water on the rubber brushes or wheels to...

Just to follow up, dumped out about a foot of water from the deep end, resolved the cya down to 30 and alkalinity issues down to 100, aerated my pool with a my sump pump 1.2 HP I use to drain water down when I close the pool with the hose about 10 inches above the water and running deck jets...

Just got the fine filter free from Polaris since I complained that the ultra fine was just not allowing the Q1+ to do the job. Threw it into the pool with it and perfect. Didn’t have to clean then filter every 20-30 minutes because it was caked. And not allowing the robot to climb the walls...

Good to know

I was actually thinking about doing that That way I can knock Of the TA as well.