Search results

Thanks for the info. I'll have to add an outlet in my box, as the builder did not install one when they put the box in. Looking at prices, the combo kit with PA and the wireless link system are only slightly more expensive than the PA alone. Not sure if I just had bad luck with the trace...

It is hardwired. And has been since 2012. Guess I’ve been lucky. Tell me more about the wireless links to connect the Protocol Adapter.

Thanks for that tip. After disconnecting all three devices and plugging them back in one at a time, I found the ScreenLogic2 PA to be the culprit. After I opened it up, I see a burnt trace on the board inside. My remote, and pump are working normally again. Time to order a new PA I guess...

I have a Pentair easy touch control center and recently lost control of my pump(Intelliflow VS), lost most features in ScreenLogic, as well as no communication to my easy touch remote. This pointed to a bad control board, or so I thought, as did the Pentair tech support. However, I swapped in...

Does anyone have info on testing the control board in the Easy Touch power center? My IC 60 stopped giving me a salt reading in ScreenLogic about two months ago, yet still functioned properly. Then this week I have been getting an error message that the EasyTouch has lost communication with...

My Mac works great! Just make sure you specify when ordering. And yes, no need to reprogram unless you want to change something!

There is actually no need to do that. The control board will keep your current settings and the screenlogic interface allows you to make changes ets from a PC or Mac, and even has some basic functionality on your iPhone or iPad like turning on the spa, lights, pool pump etc from anywhere. No...

I finished my install and it was soo simple and well worth the effort. The hardest part was fishing the control wires through the eve into the attic. It really is plug and play. That simple! If you have any questions about it, feel free to message me and we can talk and I will walk you...

After speaking with Pentair tech support yesterday, I pulled the transceiver board and noted the power light was on steady, and the 485 and RF lights flashed occasionally. I pulled the power to it to reboot the board, but still no dice. According to the tech, sounds like it may be a main board...

I am having a problem with the wireless controller of my Easytouch 8 system giving a NO COMM error. I have tried resetting both the outdoor panel and controller, and have also tried syncing both again by sending the wireless address, but my controller displays "Address Lock" and "searching for...

Maybe I just needed to give it some time...all is working great now!! :)

I just finished getting mine all hooked up. Works great from the desktop tool and from the local connection on my iPhone, but, it will not connect remotely from my phone. I have double checked the login info and it says it is waiting on the server for a while, then goes back to the local or...

Question...Can I put the wires into the same screw terminals on the COM port as the wireless receiver for my Easytouch wireless controller?

Finally got the Interface kit delivered today and want to get it installed this weekend. I assume I can just go to Home Depot or Radio Shack and pick up some four wire 22awg wire. Question...Can I put the wires into the same screw terminals on the COM port as the wireless receiver for my...

Kim, We have had a great experience with her so far, and the only thing left is the spray deck coating on all the concrete :) Our yard was really level, so I can't help you out in that matter. Kathy has done pools for 5 of our neighbors as well, and everyone has been very pleased. She...

Lights work too! My favorite thus far...[attachment=0:3qgx4tal]ImageUploadedByTapatalk1351630864.882493.jpg[/attachment:3qgx4tal]

Kids couldn't wait even though it was only 58 degrees outside![attachment=1:wx9zffh5]ImageUploadedByTapatalk1351352962.428401.jpg[/attachment:wx9zffh5] And after overnight and all morning, we are only here...

[attachment=1:3p6qvuha]ImageUploadedByTapatalk1351208856.975829.jpg[/attachment:3p6qvuha][attachment=0:3p6qvuha]ImageUploadedByTapatalk1351208872.494080.jpg[/attachment:3p6qvuha] Plaster is pebble sheen white diamonds. Acid wash and polish tomorrow, then we start filling her up!

[attachment=0:2tn007k0]ImageUploadedByTapatalk1351122187.588451.jpg[/attachment:2tn007k0] We had the decking done yesterday, and plaster prep today. Pebble Sheen goes down tomorrow! Spray deck will be applied in about two weeks, then the work of getting the yard back in order can begin...

Thanks Kim! We are looking forward to it!

[attachment=0:2md21611]ImageUploadedByTapatalk1350852875.949915.jpg[/attachment:2md21611]

[attachment=2:1auhvepb]ImageUploadedByTapatalk1350852829.796080.jpg[/attachment:1auhvepb][attachment=1:1auhvepb]ImageUploadedByTapatalk1350852841.550534.jpg[/attachment:1auhvepb][attachment=0:1auhvepb]ImageUploadedByTapatalk1350852855.809622.jpg[/attachment:1auhvepb]