Search results

Of course, I will definitely give 10 (TFP is the best thing ever to help with pools) !! I really love the "handy reference", it's so easy to use, and you can always get what you need quickly.

No more questions. I think I am good to go now. Thanks a lot. Really appreciated.

It's crystal clear now. Yeah!!

After 5 days efforts, day & night, I finally can see bottom. It could be better, so I am still keeping shock level for one more day. Really appreciate all the advice from you guys.

I backwash my sand filter every other day during SLAM process, so my gauge is always at working PSI, haven't seen it go higher than working PSI. But definitely will follow your suggestions, those are good advice.

I finished the OCLT this morning, it drops 1ppm (2 drops). Given the error allowance (.5), is it passed? So it will be only a matter of filtration time . I assume.

Totally make sense. I am doing OCLT tonight, and see how it goes tomorrow morning.

I have been SLAM my pool for almost 4 days. First day, I did have cc in the pool, but no more last night. It's been like this for almost 2 days, and bump running at 2700RPM for at least 14 hours. FC - 19 CYA - 50 CC - nearly 0 (barely color change after drops) CH -200 PH - 7.8 TA - 90...

Re: Will Shock Powder increase PH?? (48% Cal-Hypo) Well, it's late, and I don't have bleach or liquid chlorine on hand. I only have powder in my inventory, and that's why I drop them in.

Re: Will Shock Powder increase PH?? (48% Cal-Hypo) It's because my current CYA is 50-60, and FC need to be raised from 5 to 22 for the shock level. According to pool math, I have to put in 6lbs (48% cal-hypo). That's why I put 4 lbs , and measure it first before another 2lbs.

Hi : I put around 4 bags (4 lbs) in to shock the pool. (21000 gal) After few hours, I measure the PH, it jump from 7 to 7.8 or more. Is it possible? Thanks

I have a VS pump, and it looks like it has bubbles when I run it with full speed. But the filter has 10psi working pressure. So I am kind confusing if I have leak somewhere?

I think I know what happened. I was setup to run from 730pm to 530am in the cycle-1.It does not run. But when I changed to 730pm to 735pm. It runs perfectly. I also tested from 730pm to 1130pm, it also runs well. BUT it won't run when u setup something like pm to am. Even like 1150pm to...

Yes, pump is not running when I program it. I also set the time from each cycle. Just like original post, it just didn't run at the time I set up. If pump is power off, I can't even press any button.

So what exactly did you adjust to make it work? I have the same problem, I even checked the time (AM/PM) to make sure it's correctly. Please let me know. Thanks