Search results

Thank you. After 2 weeks of torture of putting the pvc pipes together, the cell is finally working. I had such struggle with small tiny leaks around the union, pvc elbows, etc - trying to get that gap perfect is impossible. One more extra quarter turn on one side made the other side leak...

🙏🙏🙏🙏🙏

Ahultin, Thank you so much for the help. I finally installed the power center. Installing the chlorinator, would you know what the gap needs to be between the O-ring and the black coupling (before getting hand tightened? The cut out template seems to be very wide. Just wondering if it...

Or should I just use these: RED wire for both Load 1 and 2 GREEN for ground

Ok thank you! I couldn’t find the split bolt (#8-#16) you listed. Would #10-#8 work? It was the most similar one looking on the shelf. Also, is it ok to use the 12/2 cable line instead of separate lines of 12 solid THHN?

So clean and chiseled. Your box looks beautiful. One last question dumb question: The bonding lug from the power center: where do I bolt down the other end of this?

Absolutely, thank you for the warning.

My goodness, thank you so much for all this information. So this image is correct right? Have 2 wires going together on both Load 1 and 2? Thank you in advance.

Got it, thank you

Ahultin, Thank you so much for the required shopping list. I have Yellow/White power wires from Power Center. Does it matter which color goes to load 1 or 2 (see image?) Also sorry for the dumb question. Where do I connect the ground wire from the Power Center on the Easy Touch panel?

Ajw, Also if you could help me locate where one of the COMM blocks are to connect the RS-485 wires, I’d appreciate it

Thank you she, Here are the pictures. If you could point to exactly where my LOAD screws are for filter pump relay, I would truly appreciate it. Also do I have to purchase these on my own below? The products didn’t come with any extra cables or wiring. Thank you so much in advance. 1...

Thank you for showing me where to cut. I have an Easy Touch Pentaire control panel below. Can you teach me step by step how to install / wire IC-60 and power supply (I have to purchase this separately correct?)

Thank you AJ and Jim