Search results

Hi All at TFP, I am building a Perimeter overflow pool in the middle of a "Courtyard House". The pool is being built up from the basement so the pool (water) surface sits at Ground floor level(see attachment pics &drawings) I am not in the US so can't access all the experts on these matters so...

Hi all, For the pool I am building above, what type of floor drain would I need, Concrete one or liner one? I am presuming I will coat the inner concrete shell of pool with a render coat then the liner. So the eye inlets and pool drain will be the for concrete pools or liner pools since the...

I am still no near to getting this off the ground. we're 60% out of foundation and will be pouring the base and side walls to the pool. As you might be aware this is a "Perimeter overflow pool "type with the overflow trough running along 3 sides. No Skimers - The Troughs act as one big Skimmer...

Hi to all at TFP! I am still no near to getting this off the ground. we're 60% out of foundation and will be pouring the base and side walls to the pool. As you might be aware this is a "Perimeter overflow pool "type with the overflow trough running along 3 sides. No Skimers - The Troughs act...

Thanks for all your valuable comments.I am putting this thing together, bit by bit as I want to buy all the plumbing bits out here(London) before returning to Ghana. Do you know what size the "surge tank" need to be? Ok,four inlets (as this is a small pool). I will be putting them in on the...

Hi to all at TFP! I am presently building a pool from the basement upwards(the pool surface is at ground floor, pool structure below an excavated basement) in the centre of a "Courtyard House" , (also under construction),so that the overflow edge is leveled with the courtyard flooring at Ground...

Ok, Thanks!

Hi, I am at the early stages in building an in ground overflow pool 7m x 3.4m, 7,587 gallons. I know this post is old but you refer to having built one with metal grate all round, which is what I want. Can you give me some leads as to the equipment I will need to build my pool and have it...

Re: Building above ground(basement) pool Hi again, No, not from this forum but from a Google search. So i don't need it, right?? - - - Updated - - - Is there someone in this forum who have built a similar pool??

Re: Building above ground(basement) pool Wow! Thanks for the info. As I mentioned, the bathing surface of this pool will sit at the courtyard level at ground floor of a Courtyard House, also under construction. So, the entire structure of the pool will be at a clear basement level(not in...

Re: Building above ground(basement) pool Hi, Thanks for the advice. I must mention that the pics were early in the design process. The pools being built from a clear basement floor up. Yes, there is a Structural Engineer onboard and the pool is not only going to be supported by those...

Hi to all at TFP! I am presently building an elevated(suspended) pool from the basement upwards in the centre of a "Courtyard House" , (also under construction),so that the overflow edge is leveled with the courtyard flooring at Ground floor. This is an overflow type pool with channels around...

Hi, we have just started the foundations for an infinity Edge pool. However, I didnt know that this form of pool is so complicated. After reading on technical data available, I arrive at the following: 1- The pool actual volume as calculated is 192m3 - say 200m3 = 7062 cu.ft 2 - The total...