Search results

I've figured it out : 1. Added a bit of WD 40 to the gap from bottom and through the multiport valve(after disassembling it) 2. I let it stay overnight to soak up the WD40 3. Then with my Chanell locks i lightly held the white PVC pipe and twisted the multiport off. It began to move a little 4...

I inherited a sand filter and when i went into replace the sand the whole lateral assembly came up and i cannot detach the multiport from the white pipe previous installed must not have lubed it can i remove or detach or fold the laterals and take it out ? can i tap the multiport off the...

ok so i tested it again ( by opening it) basically done this a few times before so i don't think it hurts. I checked for flow into the bottom of the skimmers since you mentioned venturi and i didn't see anything movement there. There are no water features - i only have a SPA Air Blower...

OK some more information : 1. I opened the eyeball on the jets and cleaned them out completely - but there is a nozzle or orifice on the inside that i cannot remove. I think I might need a special tool for that. Image attached 2. I confirmed that the SPA's are connected below ground - Image...

the cleaner line comes from a 3- port valve before it goes to the Heater : Ill send more pics of suction and whole pad soon i know the 2 SPA returns connect underground as i can see it - ill send a pic of that as well. I have not cleaned out the jets - I will do that over next few days and let...

hi, I have a question for the plumbing experts : Attached is a picture of the Return side of my Pool - Yes its horrible therefore i need to fix the leaks that have been neglected over the years. Want to redo the whole thing Simple question I have is that on the Return side i have 3 returns : (...

Your post helped me solve my problem TY. You have to set your new router to use the same DHCP range as the previous router and then it will work : So if you previous router was 192.168.1.1 to 254 then manually set it to that, if your previous router was set to 192.168.4.1 to 192.168.4.254 then...

You have to set your new router to use the same DHCP range as the previous router and then it will work : So if you previous router was 192.168.1.1 to 254 then manually set it to that, if your previous router was set to 192.168.4.1 to 192.168.4.254 then set it to that and it will work. Pentair...

This post helped me alot : You are spot on Sir : You have to set your new router to use the same DHCP range as the previous router and then it will work : So if you previous router was 192.168.1.1 to 254 then manually set it to that, if your previous router was set to 192.168.4.1 to...

This post helped me alot : You are spot on Sir : You have to set your new router to use the same DHCP range as the previous router and then it will work : So if you previous router was 192.168.1.1 to 254 then manually set it to that, if your previous router was set to 192.168.4.1 to...

Maytronics has modified their warranty to 6 months - and i am 8 months out on the Power Supply. I dont think i will be buying a Dolphin again. I don't like their Customer service.

Yes Mdragger : Done all of the tests. TY

HI I have a Dolphin/Maytronics Pool Power unit (Part Number 9995672-US-ASSY) _ I thought i could open it up and replace some parts to make it work. The unit is just out of warranty. Any ideas on how to open it up an check ? The closest i can find is this article : How to open up the Power...

I have a Aquarite G1-011056-1 RevC board, it was giving me trouble previously and i replaced the thermistors and it worked great for the season .. Last week i noticed it turned off so after i checked on it it seems like the black wires coming into the board from the Rectifiers is burning up and...

you are 100% right sir : I gets confused with the 3-way Vs 2-way so I'm going to use the term 3 port and 2 port from now on. I have 3 of the 3 port valves : Here is the exact same valve i have : https://www.poolsupplyunlimited.com/pool/jandy-4717-pro-series-neverlube-valve/53128p1 but mine is...

guys i have 3 leaking old style Jandy 3 port valves - please suggest how to re-plumb 3 new returns from SWG - I currently have SPA Return, Pool Return and Pool Drain Return as well : Didn't realize i had Pool Drain Return until recently. I want to buy 3 new NeverLube valves and replace the old...

Hi all, sorry for the delay - i thought i updated this thread but i guess not - when i opened my SWG i noticed that my board did not have any automation connectors, even though the documentation said so.. so i called the company and they said that the online docs were updated with the new board...

yeah too late for that - but the Superflo is a beast ! very happy with it !

Jim TY TY TY I'm done it took me 1 hr from start to finish 1. Checked the voltage from the 2 lines and loads like u mentioned and it came back 240V (phew - TY for that tip - I would have fried my equipment if it wasn't for you) 2. Put off all pool breakers 3. Put off main breaker in the...

I bought the Superflo VS 4 years back - why do you ask ?

firstly TY as always Jim . you are awesome remember i inherited this system ... the two light blue wires from Load #1 and #2 do goto the pump and the heater and are wire-nutted together - i followed the lines all the way through. secondly i have a Super-flow pump and i do have a 353129Z cable...

sure here you go - I didn't setup any of this - I inherited it from previous homeowner