Search results

thank you !

thanks James I appreicate your help, do you have a link, all i find is the one that if you area business

I did that and it did fail, how do I file a warranty claim with Hayward?

4E22054

So the local pool compnay shows no record i bought this Cell and I cant find the receipt. Is there anyway to contact Hayward directly to get a replamcnet with the Cell Serial #, I doubt it. Well that #1200 lasted me 2 years. I will buy knock off T cells from now on

Its weird as I have had cells go bad before but never has board behaved like that. So the test shows the Cell is bad. I bot the most expensive one 2 years ago w the 4 year warranty but didnt keep receipt i guess We will see if local pool store will honor it. Thanks for all the help

Here is a video of what mine is doing:

The above did nothing, I cant caibrate it or update the avg salinity. Let me try to post a video of what it is doing

HEre is the info (sorry didnt see someone asked this earlier) Default salt display- 0 Pool temp 87 Cell Voltage - 30.6 Cell current 0.00 Desired output (% of the knob) 75 Instant salinity 0 Product name AL-2 Software revision (r.XX) r1.59 Cell type t-15

I am not getting any voltage to the Salt Cell. So using this forum I thought I had 1 of these 3 issues: Bad In-Rush Current Limiter (RZ3) K1 or K2 Bad solder (most likely suspect) Logic Controller failure (worse case scenario) So i sent the board off to this guy: haywardboardrepair.com he...

SO I took the board out and the K1 and K2 solders appear to be fine, no burn marks at all Can you tell me more about : 1. what does replace the relay mean? 2. Bad In-Rush Current Limiter (RZ3) 3. Logic Controller failure (worse case scenario) thx

thanks the info that the cell doesnt have the DC voltage to run is correct. This is very helpful

When I do all of the above I get 0 on Salt Levl 0 on Amps and 0 Instant Salinity every time. Acutal Salt Level is 3200 when mesured with a kit the blue essece salt generator is G1-939015A the hayward t cell is a 940

So I have only had this TCell for like 1 year maybe 18 months. The other day I am getting a solid red on my aquarite reading and a solid yellow ( low salt level) I am gettting 0 on Salt Levl 0 on Amps and 0 Instant Salinity on my readings when I try to recalibrate. I know I have enouh salt...

Wow this Filter Hayward Cartridge C200SHayward is only 5 years old? What is the shelf life on these?

Ok thanks let me revise it

I have been having trouble keeping pressure for waterfalls, cleaners etc etc i think I may have found the issue. Appears to be cracks at this seam? Is this normal for this type of filter? Should I just get some JB weld and go at it? Video here: thanks

YEs cleaned and replaced recently, I dont think the filter as never had an issue when I ran a very old one for years and didnt clean as much as I shold have

Thanks TX, what would water results have to do with my water flow being low. Anyway PH an Chrloine are all good and salt level etc etc

I cant seem to figure out why I can not get much power anymore to my jets, pool cleaner etc etc Seems like the power just is down. Any help here? I have checked: The filter is not clogged and the cap is on tight It doesnt appear I have anything stuck in my pool cleaner hose I do have an issue...

My electricity bill is killing me. Trying to see how long I need to run the pump in my pool here in So Fla. Size is below. I currenlty run about 3 hrs 2 x a day for total of 6hrs

tried vitamin C and it did not work, they appear to be rust maybe from the rebar

that it what i am worried about, but i dont think showing enought to use a magnent to see, but thanks for your take

I am getting rust spots in my deep end of pool. I thoght they may come up by using a Vitamin C tablet, but no luck , look like tough rust dot stains. Any help on these? thanks

Im just relying on the control system., I guess I shuld check myself

I dumped in 2 bags of Salt but I cant seem to get my readings to say it is rising? Could this be a Salt Cell issue?

Thanks but I tried that and it didnt work

Hello All, I have tried lots on this scale, and just cant get off these pool tiles. Any suggestions on what would work best. (see photo) Im in South Florida. thanks