Search results

How about a pool guy/gal? There are some older posts in the forum about ORP sensors functioning properly. Their sensitivity is basically at odds with the CYA levels that you want in the pool. The PH level seems to be something that might be controlled automatically. Check Autopilot and...

I recently went through the same process and for better or worse ultimately came down to reading through the "which swg" and the "I have a swg problem" posts. The problems fall (in order) into 1) operator error 2) Cell at it's age limit, and 3) defective component. As far as recommendations the...

Pump / SWG Bonding Okay close to install time. The installation is fairly simple tying into the load side of the pump. In regards to the installation the manual states: "Note that this circuit must be protected by a Ground Fault Circuit Breaker (GFCB)." I have a 50amp breaker going to a...

I had the same sky-high CYA problem and my main drain has a waste basket which cannot maintain vacuum once the water level falls below the basket. When I was pumping down as the water level got below the level of the skimmers I shut off the main drain and second skimmer valves. I was able to...

I'm trying to make it as trouble free as possible by adding a swg. Should I go with the Aquapure or one of the more often recommended ones? Currently we have a circa 1997 RS6 using 3 single speed pumps for pool/spa (.5hp whisperflow), waterfall, and in-floor cleaner. At some point the...

Alice - Oops you are right. The robot is circulating water :) As far as leaves we are in the Woodlands, TX and have quite a few pine needles and a large Bradford Pear tree that drop quite a load as well as Oaks that drop blossoms in the Spring. I will try the Pool Skims this Fall. To me the...

I received the Polaris 9300 on Wednesday from an online retailer for $900. Supposedly I will get a $150 rebate bringing the net cost down to $750. Why? I opted to purchase a robot instead of spending money on a new motor, water valve, and head replacements for our in-floor cleaner. I am also...

Hello this is a fantastic site! I hope this helps somebody... 1) What pool cleaner do you own? We built our pool in 1997 and installed a Paramount PCC-2000 with two six port modules, three ports on one feed the six on the second so I suppose that's nine zones. There is a collection bag for...