Search results

  1. R

    Help with Quad DE

    Understood, but again I was only backwashing when the pressure went WAY up, not because it was the fashionable thing to do. Believe me I'd not want to touch the thing for months if possible. Now, after all this, my pressures look great and the pool is crystal clear. All the measurements are in...
  2. R

    Help with Quad DE

    FC not holding. Was 0.5 this morning. Do I need another SLAM?
  3. R

    Help with Quad DE

    Nope. Only been backwashing it more these days due to issues with clogging. Very infrequent in the early days. Now that the filters seem much cleaner I'm gonna leave it alone.
  4. R

    Help with Quad DE

    Still looks amazingly clear. I dare say even more clear than the crystal clear I was used to before all the filter issues. Perhaps a once-yearly TSP/acid wash is in the cards. Or just having the spare set helps. Today's numbers - I haven't added or touched the chemistry since before the party...
  5. R

    Help with Quad DE

    My clarity was this way before. Only recently have been having issues. But definitely notice a flow difference after cleaning the filters. Can I turn everything back on to auto (including SWCG)? Also I did a very quick backwash - like maybe 10-15 seconds. I didn't put any more DE in because I...
  6. R

    Help with Quad DE

    Party went great. Was able to run water features at roughly half pump speed rather than full. Degrading slightly as party went on. Did a quick backwash after and will let filter clean up from here.
  7. R

    Help with Quad DE

    Yes, I want that. Where did you buy it? Drop-in replacement? My FC isn't changing - still 32 solid. I haven't had any supplemental chlorine production for a while now but its holding steady. I should maybe turn the solar on but I think the pool is warm enough already so likely won't. I was...
  8. R

    Help with Quad DE

    Original.
  9. R

    Help with Quad DE

    Oops my bad. Sticky gauge. 12.5!
  10. R

    Help with Quad DE

    15.5 [emoji27]
  11. R

    Help with Quad DE

    Water clarity is phenomenal this morning!
  12. R

    Help with Quad DE

    LOL. I run the pump the whole time during a party (a bit noisy but) so that the deck jets, waterfall, and bubblers can be on. I am considering a quickie "outdoor shower" setup so that people can rinse off BEFORE getting in the pool. Also adding a full bathroom right next to it so that they don't...
  13. R

    Help with Quad DE

    Not all at once :)
  14. R

    Help with Quad DE

    Haha! We do have a lot of shade. Here's a pic of it right now (3:25pm) and already starting to shade.
  15. R

    Help with Quad DE

    Yup. I'm interested to see how the party goes. We have over 50 people coming.
  16. R

    Help with Quad DE

    The important thing will be how quickly they clog.
  17. R

    Help with Quad DE

    Similar pressures at full pump speed and after adding DE. I then ran pump at button 2 speed(I'll look up the rpm setting later) and recorded it on the dial on the pressure gauge at 12.5psi.
  18. R

    Help with Quad DE

    I wouldn't say that. Maybe a slight texture improvement. I'm repeating the process with my spare set of cartridges now and will never again use them without DE.
  19. R

    Help with Quad DE

    Much whiter after acid soak. Look like new now. Those are my original filters. 7 years old.
  20. R

    Help with Quad DE

    Filters cleaned and replaced. CYA around 70. FC 32. Safe to swim? Some photos of the day so far... Before cleaning: After TSP soak and rinse: After acid soak and rinse: Back in place:
  21. R

    Help with Quad DE

    Shock level maintaining at 32-33ppm. At tad over target but am letting it drift down. Water noticeably cleaner today. Filters soaked overnight in detergent, about to rinse and acid wash. Then install, add DE and see what shakes down.
  22. R

    Help with Quad DE

    Will do. Just about to SLAM to 30ppm after adjusting pH down a little and adding some water to lower CYA. You said it was safe to swim in 30ppm!?
  23. R

    Help with Quad DE

    For cleaning do you recommend soak ONLY, or scrub with a brush after they've been soaking, followed by a rinse, followed by acid wash?
  24. R

    Help with Quad DE

    I have plenty of DE on hand but my concern is the cartridges right now. Both sets have been run without DE so they may be causing the issues so I first need to address that and get some clean filters in there, load with DE and only then do the SLAM.
  25. R

    Help with Quad DE

    Fair enough. So do you agree, Matt, that my current plan should be to SLAM while also TSP/acid wash filter cartridges to avoid them plugging up so quickly?
  26. R

    Help with Quad DE

    I can SLAM but given I have a party Tuesday should I wait til after that? I don't want the FC level to be 30ppm when my guests arrive.
  27. R

    Help with Quad DE

    5:50am, FC measurement 5.5ppm What next?
  28. R

    Help with Quad DE

    TSP I will try to find some. Should I just soak them in a giant garbage can (new/clean of course)? 9:30pm, FC measurement 6.5ppm Stay tuned for 5:50am measurement :( Jim, could be algae. I need to clean those filters I think (running without DE on both sets is not good apparently). I do have...
  29. R

    Help with Quad DE

    FOUR kids. Wow. I only have the one. That's enough! So, for TSP, where would I find that locally and what ratio to mix it in? Giant garbage can method? How long to soak, etc?
  30. R

    Help with Quad DE

    My pool builder claims my filter is oversize for my pool. If I had your situation I would be as happy as a lark. My plan for now is: 1) Run OCLT and report back 2) Buy giant trash can and acid wash filter cartridges using procedure found in owners manual 3) Change filters out and add proper...