Search results

The number is still locked at 4700. It will not go down during calibration. I have seen posts with the same issue.

Thank you for your help. I removed water, added some. The salt digital reading in the pool is 3550. The salt level was at 4400 on the ARite screen , jumped to 4700 when I tried to calibrate, using super chrorinate switch and bring down the numbers to 3550. Other numbers: 72 24.3 7.25 85 No...

Forgive my ignorance. How do I do that?

I pressed on the little knob 5 times after hearing the click.

I just plugged it.

I installed a Circupool Gen-15 cell to replace my dead Aquarite-Rite T15 cell. It had been working fine with a knock-off board for many years. These are the readings: -4.80 88-4 r8.80 3.50 22 24.9 7.75 100P Generating light on check salt and check cell are off.

3000-3200

Thank you for the answers. I was told the issues were certainly created by bad rectifiers under the transformer. No automation.

Between the replacements of the Thermistor, the new boards, now it's the burn of the Molex 10 pin part with the same issue on the connector on the cell. I will not be able to solder this thing myself even if I ordered both parts. What would be the best option for a 27000 gallon pool?

I sent the board to be looked at. It's bad and needs to be replaced. This one was 15 years old. AQ-RITE 5A0603-1031935. I guess I need to go from r.1.40 to this one: https://poolguysupply.com/products/pcb-h-aqr

One year old. S/N:25AA5DHWE2130248 Salinity tested at Leslie s pool and with Aquachek tests. The same results all year long. The Thermistor looks OK. Would need to install a new one to be sure.

0 87 31.1 .... not generating 0.0 100P -0 AL-0 r.1.40 Tested DC voltage on AB/CD right bottom corner : .025v Salt tested at 3000. Solid red light check salt and cell. Looked at cell, nothing wrong inside. CMARCHA40-2Y by Calimar, one year old. Thank you.

2.1 ppm of Free chlorine with such a high CYA level is not great. Is it OK to have the cell output on 100%? I remember running it as high, not knowing what was the best option. The CYA level was in the 40/50s.

My mistake. It's a T-15. The pump runs for 8 hours. Remove some water and add more to lower CYA. I used account details.

Thank you Allen. Pool is 27,000 gallons. I will add muriatic acid to lower PH, have been using extra chlorine. I have read that CYA 80 is OK for hot summers in Houston. Do I need to push output on cell to produce more chlorine? Or remove water? I entered all info in my signature, I don't see...

T.9 r 1.40 AL-0 Aqua at 70% FC 3.6 CC pH 8 Added 4 drops of reacting agent to be at 7.4 2.29 qt for 20,000 gallons/ 1.43 gal for 50000 gallons. Where should I go? TA 160 CH 230 CYA 70/80 First test. Might be wrong. Will run CLT tonight

I have been brushing the pool with light algae but it seems that some are back at the bottom through jets. I vacuum it in the deep end using a canister with a bag, but I guess some is not stopped by the grids during the day. They might need be replaced. No DE comes out after backwash. What...

Generating light was back when I turned the pump on. I corrected to AL-0. Thank you for your help.

I don't know why it's AL-5. It used to be AL-2. No Jandy system.

Numbers seem OK. I guess light might be bad. 3100 88 24.6 6.44 77P AL-5 r 1.40

Hello, Some pictures from the pool which looks pretty nice with water. I contacted the woman in charge Monday morning, describing the poor job done by the crew, she said everything was supposed to be fine and I had to brush the pool. When I asked her if the people who worked on site were part...

Good point Zea3. They just hammered the pool moving inch by inch. As far as I remember, the plaster around this jet before was pretty flat to me. I used a scuba tank in this pool quite often and I am familiar with it. Most of the estimates that I received were pointing to this approach. A...

Sure. I guess it will look OK under water.

Trusted the reviews. Oh well. C'est la vie.

The light has been removed and they plastered the hole. I found another bump close to the three steps in the wall going to the metal ladder. Brilliant idea to use HomeAdvisor and choose a company with great feedback! Thank you Sir.

The bumps are really hard solid. Is it possible to sand area to get it flat? Poor job under the tiles for sure. Do I still need to fill up the pool? I need to contact them in the morning, they are expecting me to pay the other half! Thank you.

Filling up the pool and noticed big bumps around jet, not flat at all. Normal? In the deep end (10ft), it seems that it was not easy to reach the bottom of tiles and create a nice line as opposed to other areas of pool. Far more plaster on the left side and poor finish on right. Can they sand...