Search results

That should be pool cya= 60, and poolCH= 750

Using T-100 test kit. Fc=5.5 CC=.5 Ph=7.4 TA=80 CH=60 Salt=2600ppm Temp88 Fill warerPh=8.0 CH350 TA=140

I’ve got more than enough calcium particles in my pool water. PH is at 7.2, chlorine is it at 3-4, Salt when I tested it with Taylor Equipment I get 2600 ppm of salt, the Pool store comes up with 3500 ppm, I do have to clean the salt water generator every 3 to 4 weeks. Anything I should be...

Thanks Jim

The cya thing is kind of confusing, I changed my pool water totally and naturally the cya was well over 100 so I added the pool conditioner and finally got it down to a 60 cya. Am I correct in saying that the only way to raise the cya is to drain a little water out of the pool and add fresh...

Outdoors gal you don't want to add any more cya if you're at 45 or 50 now. If you add any more cya CONDITIONER you'll go lower and then you will have to drain your pool some more. Did you test your fill water for the salt content? I have 400 parts per million salt content in my fill water...

According to my saltwater generator I have enough salt cuz the light is on and it's a green for go so I started up my swg.

Tap H2O IS 400PPM

Just got done draining and filling my pool 10500 gallon pool 5 bags of salt got me the 2600 parts per million can I leave it there and will the salt water generator work on that because over the summer I'm not here in Yuma Az. ànd I usually gain salt content even though guy at Leslie says that...

What does it look like Sent from my XT1585 using Tapatalk