Search results

I love my 3900 Sport but recently the feed hose has been disconnecting from the vacuum tube / feed pipe assembly. I have replaced the feeder hose connector but still having this issue. The feed pipe looks like in good shape with no visible cracks / chips / defects and the factory o-ring is...

How does one know when this has gone bad? or is malfunctioning?

Brand new MasterTemp 400 connected to IntelliCenter utilizing Fireman's Switch + J2 connection for Automation. Max temps set on heater as follows: Pool Max Temp : 104F Spa Max Temp : 104F When 104F selected as set-temp for Spa, I cannot get the spa to exceed 99F/100F??? It can run for...

I have two (2) IntelliFlo pumps that are below water level in a "flooded" state controlled by IntelliCenter: - 1 x IntelliFlo3 3HP (used as main filter pump) - 1 x IntelliFlo VS (used as waterfall pump) When both pumps start they seem to jump to very high speed and push a ton of water for...

Sadly, I tripped and fell on my equipment pad. In the process, I ended up busting the Booster Cleaner Return pipe all the way down at the concrete :( Any tips on how to repair. From the looks of it, it was repaired once before with a pipe-in-the-pipe. Fingers crossed that the wisdom of this...

Over the last 15 years, I've had Polaris PB4-60Q booster, Pentair LAMS05 Booster, and most recently Puri Tech (now Intermatic) UniBoost. I need to replace my Puri Tech UniBoost and trying to figure out whether to buy: Pentair Hydroboost (360526) for $400 or Pentair Booster (LA01N) for $360. I...

My multiport valve has a slow leak thru plumbed back flow PVC. I will be replacing the valve at some point in the next few weeks, but until then it would be nice not to waste water. I am curious if there is a clever solution for using the existing union connection and plugging it without...

Does anyone have warranty information for the Puri Tech Uniboost 1.5HP Pump? I seem to recall the warranty was longer than 1-year, but I cannot find my original paperwork / owners manual.

I need to get a valve between my heater and CMP PowerClean VS chlorinator. Who makes the best serviceable corrosion resistant check valve? If seen offerings from Jandy, Pentair, Magic Plastics, and CMP.

After 14-15 years things are showing signs of extreme wear and breaking down. Here is my current setup Filter - Pentair FNS Plus 60 Main Pool Pump - Pentair Intelliflo VS3050 Waterfall Booster Pump - Pentair Whisperflo High Performance 3/4HP Pump Cleaner Booster Pump - Puri Tech Uniboost...

I have a MasterTemp 400 (MT400) that is connected to an IntelliCenter automation system. The heater has been working well for years until the last few days.... I decided to troubleshoot this evening and sat for over an hour pushing buttons on the heater... long story short... I would turn on...

Ever since the summer ended, we do not access the Pentair Home iOS app or Intellicenter2.com sites. I can no longer access my Pentair IntelliCenter via the Pentair Home app nor via Intellicenter2.com. I try to use either and i'm not able to access my home system. Any one else experiencing the...

Anyone upgrade from previous generation IntelliBrite Color LED lights? I have 2 x Pool (600101) and 1 x Spa (640051) that were installed about 14.5 years ago that are showing signs of age (namely not as bright as they used to be). I'm leaning towards upgrading with new models but curious...

My pool sevice company notified me of a pin hole leak in the PVC coming into the booster pump for my Polaris 3900 Sport. Attached is a grainy picture they shared with me. They wanted $300 to repair, which felt really high. It seems to me, that i would just need to cut behind current valve...

Does anyone know if there is a replacement website for Intellicenter2.com as part of the Pentair Home App migration? I like accessing My IntelliCenter from my laptop sometimes instead of using my iPhone.

Has anyone have any experience with KoolYourPool aerator? www.koolyourpool.com I'm in Austin, TX and this summer is killing our pool water temp... The water temp regularly exceeds 90F.

Years ago I installed IntelliBrite color changing lights in my pool and attached spa. I have two lights in the pool and one in the spa. The pool lights are starting to dim and dont seem as bright as they used to be. The lights are controlled by Pentair Intellicenter Automation. Also, our...

Out of the blue i'm getting an alert on my IntelliCenter regarding communication lost with MasterTemp heater? Oddly, whenever, I want to turn the heater on, for example, with my spa it works fine thru the IntelliCenter interface. After turning on the heater, the error persists.

I have an IntelliFlo VS that was installed YEARS ago. I recently upgarded my Intellitouch i9+S automation system to an IntelliCenter. Ever since the upgrade, I can no longer control my IntelliFlo VS after 8pm Central Time. Pentair says I need to upgrade to a newer pump and the "old" pump...

I am trying to find the right replacement part for my hottub. I believe these are Venturi Air Control. The old ones measure as follows: Widest diameter of top cap = 2-5/8" Length from Bottom to Cap = 2-5/8" Total Length = 3-1/8" Outer diameter of threaded portion = 1-1/4" Happy to provide...

Anyone have experience with this pump? My Pentair Boost-Rite pump has died. I was considering this as a replacement...

I recently upgraded an old Pentair IntelliTouch i9+3 to an IntelliCenter using the upgrade kit. The IntelliCenter firmware has been upgraded to the latest 1.064. My primary interface is via iPhone App. During the day, the system works great. All the automation works as expected. Manual...

Is there a way to set the default temperature for the Spa Heater? Everytime i change the Heat Mode from OFF to MasterTemp the default Spa Temp is 78F. I'd like it to be 95F so when I select the MasterTemp option it automatically starts heating without me having to manually raise the...

Hello, Just upgraded my ancient IntelliTouch i9 with a brand new IntelliCenter Upgrade Kit (mfg date of 6/22). My setup is hardwired ethernet. I have confirmed I'm connected to the internet, Internet test passed. In fact, the hardware upgraded to the latest firmware over ethernet and i'm...

I have had a StaRite (now Pentair) S7MD72 D.E. Filter. that was replaced with a Pentair FNS Plus FNS60 Pool Filter (Part 180009). The filter has been serviced annually but is starting to show signs of wear. If I was to consider replacing this filter with something new, what would be a good...

I have an OLD (circa 2012) IntelliTouch i9 system. Equipment : - Automation : Pentair Intellitouch i9 + Pentair Protocol Adapter (via hard wire to COM Port) + ScreenLogics2 - Controller : In-home Pentair Wall Controller via hard wire to COM Port - Main Pump Pentair IntellifFlo VS - Pool Cleaner...

I have had three or four Pentair IS10 Spa Side remotes over the past few years. They last about one to two years and then breakdown from the weather. I'm fed up with spending $500+ on a device that we barely use. Does anyone have a recommendation of what to do with the holes left behind by...

Any tips on getting ScreenLogics on Apple Watch Series 6 or Apple Watch SE working? I've got ScreenLogics2 working on my iPhone, my iPad, and my MacBook Pro running MacOS 11 (thanks to PlayonMac). However, everytime I launch ScreenLogics on my watch it sees the Protocol Adapter but when I...

I have had several Polaris cleaners over the last two decades (280, then 380, most recently 3900 (bought twice, one stolen out of my pool) for the last 10-ish years). My 3900 is starting to act up, not really doing the job. Its probably due to for major repairs or replacement. I live in Austin...

It has been quite a while now, but we’ve noticed that our propane tank makes a funny noise when the Spa heater kicks on. I have a video showing the noise but I could not attach it. The noise doesn’t happen when we first turn on the hot tub heater, its virtually silent. The sound occurs after the...