Search results

Good morning, I have a 18x36 in ground liner pool with a 9-year-old liner. I pulled my solid cover off about a week ago and was surprised to see only about 6" of water left in the shallow end. Luckily it didn't let go and its finally full and got everything up and running. I don't understand...

I redid my plumbing this year and added a one way jandy check valve in front of the pump. When they go to blow out my lines while hooking into the pump obviously it’s not meant to flow that way. Do I take the lid off of the check valve and remove the flapper or turn it around to allow that?

For the most part I have ph rise in my SWG pool. 5 days ago I adjusted Ph from 7.8 to 7.4 and TA from 60 to 70. today it’s already back to 7.8 and 60. So added more baking soda and Muriatic acid. Is it time to dabble in borates? Also concerning FC. At 40% on the salt system it’s been steady at...

Curious why a 70-80 cya is recommended for a SWCG pool versus a 30-50 for a traditional chlorine pool? Is it because a lot of SWCG or too small for the pool size and they need the extra chlorine loss protection or what? I have my CYA right now and have been maintaining 4-5 FC level. I picked up...

Hello everyone! Last year I ran a 1.5hp Superpump and skimming performance in my opinion was great. I opened this year with a new Intelliflo VS and new SWCG. I have 3 suction lines (2 skimmers and a bottom drain). What is everyone opinion on the bottom drain valve position. I thought I read on...

Hello, I’ve been on a weekly test routine since installing my new SWCG system (which is working great) with CYA 50 and RJ60+ running 12 hours at 20% it’s my chlorine has been solid between 5 and 6 (5.6 yesterday) my PH has stayed at 7.8 for weeks with out any acid added. If it’s solid at 7.8...

Hello all, Near the end of last season my young kids were jumping off the diving board to me in the water and I noticed one of the channels under the board was cracked. Upon further inspection from the top there was a lot of spider cracking on the top of the board as well. Is there any issue...

Had the pool looking great, just got my SWG going a couple days ago and vacuumed and noticed what looks like dirt settling on the bottom of the pool. And more so along seams and creases. Pool opened blue not green. Is this algae or pollen or what? I would have figured pollen would be on surface...

Hello all. Just yesterday I finished my install of the Intelliflo and Circupool RJ 60+ SWCG. I’ve been letting my dolphin clean up winters mess and i added 13 bags of Morton’s pool salt. Salinity is 3200ppm. I currently have the dummy tube in place of the SWCG until I get the rest balanced then...

Hello all. Longtime lurker, first time poster here! I have a 26k ish liner pool with a 1.5hp Superpump currently. Looking to convert to salt and also do a pump upgrade at the same time. Here’s what I’ve picked out so far Pentair Intelliflo VS pump 011028 Pentair IC60 SWG Pentair power center...