Search results

  1. noelc

    Air Pressure Test on Opening - Leak concern

    I am taking the opportunity to do a pressure test before opening the pool. I tested at 20psi of air and it held for a couple hours. Overnight, with temperature drop, the PSI in the morning was 12PSI. Approximately 15 hours later. I did bucket test last year and did no show any visible results...
  2. noelc

    Possible Leak - Best way to test?

    I've had some wet area behind the pool in my spruce trees for a while. It's not super well graded and drained but has not been drying. I also have one tree that has been stressed and appears to be dying. I've been looking at the grading, but just realized this might be due to the pool...
  3. noelc

    Pool deck expansion joint - foam from builder- replace with caulk?

    When my builder finished the pool they left a white foam strip in the expansion joint between the coping and the concrete. About a half inch. I asked them if it should be caulk and they said no at the time. this will be my third season and it never seemed right to me. So I did some reading and...
  4. noelc

    Vinyl Closing - Helping Neighbor

    I'm helping a neighbor close their pool this year. I closed mine last year with good success, however, I have a Plaster pool and concerned about any differences. See pics I have a couple of questions on closing a Vinyl pool. I've instructed him to make sure the pool is clean and balanced...
  5. noelc

    Winter pH prior to Acid Wash

    Moved from here Having similar issues to a new pool plaster with blemishes. PB is thinking to empty and acid wash in the spring. I have to pay to refill. They also mentioned winterizing with a PH of 7.2 over the winter. I have already closed and covered. Currently maintaining the pool and...
  6. noelc

    Main drain bubbles after air lock closing??

    Just wrapped up closing my pool. Everything looked good for a while but.... As I went to go double check I noticed the main drain is bubbling every few seconds. I verified I have this air locked. At the moment I do have 10 PSI of air pressure making sure everything holds. However I would...
  7. noelc

    Should you totally drain spa?

    Is there a reason not to totally drain the spa? I will still clear all return lines and blow out spa drain. My my only concern is that totally emptying it won’t create an air lock. If that is the case should I leave some water in? I was originally planning on lower below spa return and...
  8. noelc

    Closing with Salt Generator - SLAM

    I am plannin to SLAM the pool this weekend after last use and putting in Jacks magic today. Can I shock the pool using the Salt generator increasing production to 100%? My other option is I have shock “proteam power 73” and can put in 3 bags or 6lbs for 30,000 gallons. From there I will...
  9. noelc

    Double Main Drain Closing question

    First time owner of pool and first time closing. I just did a dry run of my closing steps and have a question around the main drain. I have a double main drain, with 8ft deep end. I attached a air compressor at 30PSI and blew out the main drain line. However only one of the main drains had...