Search results

Success!!!:cheers: I would like to thank you for all your patience and perseverance. You are truely a blessing. Everything worked the way i've been reading it. I don't know the words to say how much I apprecate all you help. I hope the rest of your weekend is great, and again thanks so much. Ray

Yes, my normal schedule is 7:00am-5:30pm, I will close up everything and turn the system on, and put in service mode.

Here's what I did. I took the 2 blk wire, and connect to pin 1&3 on the pump/filter relay, then jumped from Aux 1 pin1&3 to Pump/Filter 1&3. Do I need to make any changes to the intellicenter controls pins or jumpers?

Can I use 14 guage wire for the jumper wire?

If you don't think that's a good idea, I think I follow what you detailed in the insturctions.

I believe that AUX 1 is going to the pool side cleaner that is no longer being used. Can I remove the wires that go to that pump, and use that relay?

:eek: Ok, Im going to have to take this very slow..

Here's the rest of the pics. I hope I narrated it ok.

Yellow, white wire are connected to 2 black wires in the conduit, green is grounded. To the right is the cable connecting to cell, also a grey wire that's connected to terminal inside. (green,yelllow,red,blk). Conduit comes out left side of pwr center, down back of main power box. Into the...

Hey Jim R, As soon as I flip the breaker, the cell turns on. I switch the port for AUX1, and nothing changed. I switched everything back, and tried to turn on AUX1, and nothing happen. I did hear a click in the power center. I think it's the pump to the original pool cleaner pump.

I think your right. the first breaker in the panel, is where the cell is connected. That was used for the original salt cell. If I turn that breaker off, the cell goes off.