- Apr 25, 2016
- 78
- Pool Size
- 25000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I installed this IC40 in May of 2018. It still works flawlessly. The problem I have with it is the top half of the housing is starting to separate at the forward end. At higher speeds it leaks right where the gray adhesive(?) is visible. I was afraid that it would totally separate one day when I wasn’t around and cause major chaos to my equipment! It was painful to shell out $1400 but you can’t put a price on safety. I plan on keeping it,just in case, and knowing that I need to keep the pump speed down low. I was just curious if anybody has seen this or if it’s possible to fix it.
One other thing, on the old IC40 I could run the pump as low as 600 rpm but the new one triggers the flow light if I try to go that low, odd.
One other thing, on the old IC40 I could run the pump as low as 600 rpm but the new one triggers the flow light if I try to go that low, odd.
