Hello all,
I'm new here. I have a 32k gallon in-ground pool in LA, currently having issues with my Raypak 407A LoNox pool heater. It's about 3 years old and on first start it starts just fine, but after it has reached target temp shuts down and tries to restart to reheat I get a Main Ign Failure. When it's turned on after a short rest (Stil hot) the Pilot lights blower turns on and for a split second the burners light then immediately shuts off. It does it 3 times before it locks out for 6 min. I've already had bad experience with the contractor who installed it so I cannot call them. They ghosted me when the Spa blower went out and I ended up doing a warranty claim myself.
I'm new here. I have a 32k gallon in-ground pool in LA, currently having issues with my Raypak 407A LoNox pool heater. It's about 3 years old and on first start it starts just fine, but after it has reached target temp shuts down and tries to restart to reheat I get a Main Ign Failure. When it's turned on after a short rest (Stil hot) the Pilot lights blower turns on and for a split second the burners light then immediately shuts off. It does it 3 times before it locks out for 6 min. I've already had bad experience with the contractor who installed it so I cannot call them. They ghosted me when the Spa blower went out and I ended up doing a warranty claim myself.
- Removed Piot tube and checked for blockage
- Pilot light is lit and burns super clean so much so I can hardly see it.
- Just replaced ignitor
- Once pilot light is light ignitor does not sound as loud (I dont think this happened when it was new)
- I cannot see all the burners, but the outer one is burning blue.
Last edited:
