Hottub water cloudy after PH.

Hyrul · Saturday at 3:27 PM

Hi all,

My water was crystal clear this morning but noticed the PH was a bit low. I guess I added more than necessary because it went very purple on my Taylor test kit (I assume over 8). The water got very cloudy.

I used a PH decreased and got it down to normal levels, but the water is still very cloudy.

Alkaline 60
Calcium 220
Chlorine 3

Should I just run the jets for a day? Or do I need to drain and refill?

ajw22 · Saturday at 3:34 PM

Let things settle down for a day or two and see if the water clears.

The sudden pH rise caused stuff to precipitate out of the water.

Hyrul · Saturday at 5:34 PM

I was testing the CH and noticed the little speckles which are causing the clouding. I'll let it sit as suggested but it's looking bleak

JamesW · Saturday at 5:53 PM

Hyrul said:
I guess I added more than necessary because it went very purple

How much and what did you add?

Hot tub volume?

Hyrul · Saturday at 5:55 PM

3500 liters... fiberglass. I added PH increaser.
I had eyeballed it, unfortunately. Lesson learnt. The Taylor kit goes up to 8 but I would guess mine was probably 9-10. I brought it down to normal quickly after with decreaser. I'm thinking I should just drain to be safe

Search

Hottub water cloudy after PH.

Hyrul

Member

ajw22

Hyrul

Member

Attachments

JamesW

Hyrul

Member