Having doing my own testing from TFTestkits. When I start up my pool do I still need a opening kit from a pool store or do I just start testing and get my levels normalized? Hope that makes sense.
Pool start up
- Thread starter crampone
- Start date
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Jun 24, 2021
- 15,878
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Did a bunch of work in CA...I spit out my coffee when I read this...could hear it in my mind.
Ya = Yes
No = No
Ya No = No
No Ya = Yes
Ya no, for sure = Yes
Ya Ya Ya = No
Ya no ya = I'm willing to do it (*but sometimes means yes)
No ya no = No way I'm doing it
Does my water have to be a certain temperature to start testing after I open or can I test right away?
- Jun 24, 2021
- 15,878
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Yes, except CYA. Needs to be room temperature.
I allow the sample to come to room temp, or take my plastic sample bottle (capped) and heat with hot water from the tap.
I allow the sample to come to room temp, or take my plastic sample bottle (capped) and heat with hot water from the tap.
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Only the CYA test is temperature sensitive.
Let the CYA water sample warm to room temperature before adding reagent.
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Similar threads
