Is there a way to create an interlock within the OmniHub to prevent the acid pump from injecting acid while the AquaRite is on? Under the "Equipment to Equipment" settings, I don’t see the SWG listed at all.
when the OmniLogic is configured to automatically dispense acid based on the pH sensor it dispenses acid regardless of the cell status
I will eventually create mutually exclusive schedules for the SWG and the Acid Pump (timed production/injection instead of sensor based) but I wanted to have the option to use the sensor to drive the acid at least ( ORP is erratic ).
Some experts on this forum suggest that injecting acid before the SWG while it’s operating can damage the plates. Others argue it’s unlikely to cause damage due to the high water-to-acid flow ratio, even at lower speeds (e.g., 35 GPM to 10 mL/min).
If it’s not possible to create an interlock and acid is injected before the SWG while it’s active, is there any real risk of damage to the cell?
the related posts I found are from years ago, Is anyone nowadays successfully injecting muriatic acid (MA) before an AquaRite via the OmniHub without issues ?
Thanks!
when the OmniLogic is configured to automatically dispense acid based on the pH sensor it dispenses acid regardless of the cell status
I will eventually create mutually exclusive schedules for the SWG and the Acid Pump (timed production/injection instead of sensor based) but I wanted to have the option to use the sensor to drive the acid at least ( ORP is erratic ).
Some experts on this forum suggest that injecting acid before the SWG while it’s operating can damage the plates. Others argue it’s unlikely to cause damage due to the high water-to-acid flow ratio, even at lower speeds (e.g., 35 GPM to 10 mL/min).
If it’s not possible to create an interlock and acid is injected before the SWG while it’s active, is there any real risk of damage to the cell?
the related posts I found are from years ago, Is anyone nowadays successfully injecting muriatic acid (MA) before an AquaRite via the OmniHub without issues ?
Thanks!
