I have a Jandy VSP that's setup with a few different speeds: an idle speed of 1100 RPM, a filter speed at 1750, and a solar heating speed at 2200. I just noticed that my pump is running at 1750 even though it should be idling right now. I'm not sure if this is because the pool temp is too low or what. Any ideas?
Jandy VSP not running at idle speed
- Thread starter newpoolj
- Start date
- Jul 21, 2013
- 65,336
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Under what conditions do you think your pump should be idling?
The lowest speed should be when the filter pump is on with no other functions. That looks set to 1750 rpm.
@PoolGate can help you fix your VS Speed settings and labels.
The lowest speed should be when the filter pump is on with no other functions. That looks set to 1750 rpm.
@PoolGate can help you fix your VS Speed settings and labels.
Doh! I just noticed my schedule was changed! Apologies, my pool person must have changed it to have the pump running right now for some reason. I updated the schedule so that the filter should not be running right now, turned the pump off and on, and now it's idling again as expected.
Sorry for the false noise!
Sorry for the false noise!
