I bought a "Intex Krystal Clear 2150 GPH Sand Filter Pump & Saltwater System with E.C.O." system 4 years ago and it's been working great until recently. It was working fine this season until I plumbed in a large solar heater and moved the pump and filter. Now, the lights of the pump aren't turning on (kind of intermittently) but the pump is actually running.
When I turn it on, no beeps occur and no lights come on. The buttons are unresponsive. Every once in a while the "working" light starts blinking green and I see the LED readout at 05, which was the last time I had programmed. The cell is clearly not making chlorine though.
I did some searching here and see plenty of issues, but nothing that matches mine. Any tips? If not, any recommendations for a new pump/filter/Chlorine generator?
I have a 20x10x3.5 Intex above ground pool. My solar heater is on the ground since I didn't think the pump could handle a roof installation. I'd like my next pump to be able to handle pumping to my roof. Thanks!
When I turn it on, no beeps occur and no lights come on. The buttons are unresponsive. Every once in a while the "working" light starts blinking green and I see the LED readout at 05, which was the last time I had programmed. The cell is clearly not making chlorine though.
I did some searching here and see plenty of issues, but nothing that matches mine. Any tips? If not, any recommendations for a new pump/filter/Chlorine generator?
I have a 20x10x3.5 Intex above ground pool. My solar heater is on the ground since I didn't think the pump could handle a roof installation. I'd like my next pump to be able to handle pumping to my roof. Thanks!
