We’re having our pool refinished with new tile, coping and gunite. They put in the coping and stone tile around the spa area and when I inspected it all a little closer I discovered chips the size of nickels and dimes in multiple coping tiles. The back side coping tiles have really bad jagged edges as though the blade was dull while cutting those tiles. In addition to broken pieces of the stone tile stuck in place. Plus the coping line inserting to the spa with a cut edge vs angled into the spa. There are a few tiles that don’t line up and are more than 1/8th of inch difference. I’m attaching pictures.
I just need to know if this is typical? I don’t want to be difficult and could understand one or two small chips but there’s over 10 tiles that have chips in them that they tried to fill with grout. See the pictures and please advise.
I just need to know if this is typical? I don’t want to be difficult and could understand one or two small chips but there’s over 10 tiles that have chips in them that they tried to fill with grout. See the pictures and please advise.
