- May 16, 2021
- 103
- Pool Size
- 27500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
Hi TFP community. I noticed some spots on my walls. Nothing obvious to the regular bystander, but I am very analytical with my pool. When I brush it, it comes right off. Later on, I notice that it comes back. From what I read, this could be a little mustard algea, although I also read that is rare...especially in the NE where I am in NY. My water is crystal clear, passes the over night test, and has CC of less than .5. Again I will stress that I notice it but most don't or won't.
My readings are attached.
My thoughts are this does not qualify for a SLAM. I would hate to have to drive FC up to 31 and then not be able to use the pool for a while because of the need to wait for it to drop. I get that it is technically safe to swim below shock levels based on CYA chart but I just don't feel comfortable letting people and kids jump in the water with FC levels way above 10.
Any thoughts. Maybe a little Cal Hypo and get it up to 10? Thanks
My readings are attached.

My thoughts are this does not qualify for a SLAM. I would hate to have to drive FC up to 31 and then not be able to use the pool for a while because of the need to wait for it to drop. I get that it is technically safe to swim below shock levels based on CYA chart but I just don't feel comfortable letting people and kids jump in the water with FC levels way above 10.
Any thoughts. Maybe a little Cal Hypo and get it up to 10? Thanks