Automation recommendation + SWG

Jump to latest Follow Reply
kingadriann

kingadriann

0
Oct 26, 2016
48
Katy
Pool Size
25000
Surface
Plaster
Chlorine
Liquid Chlorine
Good morning, I need recommendation for Pentair automation that includes SWG that can handle the following equipments.

24,000 gallon gunite, chlorinated pool
Pentair Clean & Clear 520
Pentair Intelliflo VSF 3 hp
Pentair Whisperflo Single speed pump 1 hp (for my waterfall)
Pentair Heater 400,000 btu
3 Intellibrite white lights

I want something that I can control via Iphone / Ipad through an app, cost effective and does the job.

Thank you in advance.
 
Pentair Intellicenter w/IC60 SWG
www.pentair.com

Product SKU

From residential and commercial water solutions to industrial water management and everything in between, Pentair is focused on smart, sustainable water solutions that help our planet and people thrive.
www.pentair.com www.pentair.com

Do you have an integrated spa? If so, you need the pool/spa combo. If no spa, you can use the pool only version.
 
proavia said:
Pentair Intellicenter w/IC60 SWG
www.pentair.com

Product SKU

From residential and commercial water solutions to industrial water management and everything in between, Pentair is focused on smart, sustainable water solutions that help our planet and people thrive.
www.pentair.com www.pentair.com

Do you have an integrated spa? If so, you need the pool/spa combo. If no spa, you can use the pool only version.
Click to expand...
Yes, my spa is in ground and connected to my in ground pool as well. I hope that's what you meant.
 
Yes, that is what I meant.

I just realized that I said Intellicenter and provided a link to the older EasyTouch.
The Intellicenter is Pentairs newest automation system. Here is a link to their i8PS, which will work with a pool/spa combo.
www.pentair.com

sku-page

Pentair delivers smart, sustainable solutions that empower our customers to make the most of life's essential resource. At Pentair, we believe the health of our world depends on reliable access to clean water.
www.pentair.com www.pentair.com
I think it may also be available with the IC60 instead of the IC40. The IC60 is better suited to your pool and location.
 
proavia said:
Yes, that is what I meant.

I just realized that I said Intellicenter and provided a link to the older EasyTouch.
The Intellicenter is Pentairs newest automation system. Here is a link to their i8PS, which will work with a pool/spa combo.
www.pentair.com

sku-page

Pentair delivers smart, sustainable solutions that empower our customers to make the most of life's essential resource. At Pentair, we believe the health of our world depends on reliable access to clean water.
www.pentair.com www.pentair.com
I think it may also be available with the IC60 instead of the IC40. The IC60 is better suited to your pool and location.
Click to expand...
The Intellicenter seems to be the better choice and it's about the same price too. I found out that my pool is actually only 20,000, I hope the IC-40 is sufficient? Thanks.
 
Ok, I will try to buy the IC60 :), I will have to work overtime so I can stretch my budget a little bit :)

I have another question in regards to my pool. Right now we have concrete coping, with concrete waterfall. Will the salt system be too corrosive, even if I maintain the water chemistry right? I have no tile coping / any stone deck, all are concrete surrounding the pool.
I have plaster (not Pebble-Tech / Wet Edge) for the pool. Here is a picture of my pool, hopefully it helps.
 

Attachments

  • pXv_c5MPRUuQTvg1mFZACQ.jpeg
    pXv_c5MPRUuQTvg1mFZACQ.jpeg
    379 KB · Views: 7
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply