Filter, Pump, Plumbing Review.

PoolStored · Sep 18, 2021

Newdude said:
You are already running 24/7, so now you will be producing 24/7 too, unlike the 4 hours of the Stenner pump. Dial that bad boy into the top end of target and it will no longer matter *what* happens, *when*.

We'll see, color me skeptical, but it will be fun to put in and see what happens. Side question, when I go get salt in bags, do you just dump them in and swirl? Will the salt pellets sitting on the vinyl damage them?

Newdude · Sep 18, 2021

PoolStored said:
Side question, when I go get salt in bags, do you just dump them in and swirl? Will the salt pellets sitting on the vinyl damage them?

Dump them in the shallow end. They will be 60% gone right off the bat. Come back and brush 20 mins later. To get most of what’s left. Or have the kids swim it up. Safe and harmless for everything except the SWG. You don’t want salt sludge going though the on unit. Make sure it’s off.

PoolStored said:
We'll see, color me skeptical, but it will be fun to put in and see what happens

You seem like an overly efficient dude. (In a good way). You’re gonna love it, it’s right up your alley. Is it needed ? No. Is it darn sure nice to be running at peak efficiency around the clock ? You betcha. Lol.

Get water softener salt from HD / Lowe’s. It’s by the hot water heaters at both stores and is $5 a bag instead of $8. There should be plenty in the aisle this time of year. Make sure the bag says 100% and/or pure. Some of them have traces of iron.

And don’t forget to test your baseline salt. It’s pretty surprising to most, how much they already have.

PoolStored · Sep 18, 2021

Newdude said:
Get water softener salt from HD / Lowe’s. It’s by the hot water heaters at both stores and is $5 a bag instead of $8. There should be plenty in the aisle this time of year. Make sure the bag says 100% and/or pure. Some of them have traces of iron.

And don’t forget to test your baseline salt. It’s pretty surprising to most, how much they already have.

Replacing liner in Oct (assuming delivery) so will be a full refill. Is there typically salt in municipal water?

Did order the salt test kit, will test before I drain, just to see the current salt level for comparison.

Newdude · Sep 18, 2021

PoolStored said:
Replacing liner in Oct (assuming delivery) so will be a full refill. Is there typically salt in municipal water

Usually not much. But there can be a bunch in your balancing chems. Somebody a month or so ago was at 600 after refilling and balancing.

low in the grand scheme of things but plenty high to make you overshoot the target. Lol.

PoolStored said:
Did order the salt test kit, will test before I drain, just to see the current salt level for comparison.

PoolStored · Sep 18, 2021

THAT was a cool test...my favorite by far. 1000ppm.

PoolStored · Sep 18, 2021

Sooo, @Saturn94 sent me a spent cart, starting on the plumbing re-build while the real SWG is on the way.

Not stupid confident I'm going to like the SWG, and DW raised her eyebrows when I said salt pool (I know I already have a salt pool...I LEARNED MY LESSON...no derision).

Anyway, thinking I'm going to include a 1/2" tee, after SWG, so I can either use my stenner for LC if I don't like the SWG, or for MA if I do.

Do I need a check valve between the SWG and the Stenner injection Tee? I already have a check valve that I as going to put after the heater. Should I just move it to after the SWG?

Does the check valve *HAVE* to be corrosion resistant? This is the check valve I have: Check Valve

Newdude · Sep 19, 2021

PoolStored said:
Do I need a check valve between the SWG and the Stenner injection Tee? I already have a check valve that I as going to put after the heater. Should I just move it to after the SWG?

Does the check valve *HAVE* to be corrosion resistant? This is the check valve I have: Check Valve

Sorry I’m not too great with check valves so hang tight for confirmation/ denial.

I would say you need a robust CV before the stenner tank in case you go to MA. A few SWG manufacturers still want one between the heater and SWG but I think those are being overly cautious. Mine didn’t have one and it was fine. They all do the exact same thing so I don’t see how model ABC needs one and LMNOP doesn’t.

PoolStored · Sep 26, 2021

@Newdude Replaced the entire plumbing! In bound to MPV and out from heater. Before and after. All pentair never lube, bypass on heater, check valve on heater, salt dummy (circupool cell and controller in the garage until spring), flow switch, and two injection Tees for Stenner chlorine and MA if I want in future!

No leaks! Water on floor was from taking basket and cleaning, sucked some leaves.

time to jump in and catch me some leaves!

PoolStored · Mar 21, 2022

Newdude said:
Your equipment works great. Your methods work great. Don’t tempt fate. She is not a *kind lady*, they say.

I'm now glad I didn't listen to you WRT converting to SWCG. Given the price of Chlorine, I think I made the right decision. Now wait 2 months until I have an issue with the SWCG and decide to switch back to LC.

At least I plumbed in a T for the stenner pump so I can use it if necessary for CL or MA!

Newdude · Mar 21, 2022

PoolStored said:
I'm now glad I didn't listen to you WRT converting to SWCG

At the time i was being devil's advocate. You had a great setup and it worked well for you. That said, i secured my own SWG for the upcoming build before i even signed the contract. I'm that big of a fan of them. They still haven't dug yet a year later but thats ok, i have my SWG if they show up tomorrow.

We both lucked out with last years prices too. What was $1500 then is $1800 now.

Search

Filter, Pump, Plumbing Review.

PoolStored

Newdude

PoolStored

Newdude

PoolStored

PoolStored

Newdude

PoolStored

Attachments

PoolStored

Newdude

Enjoying this content?