- Apr 18, 2017
- 86
- Pool Size
- 32000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
pH determination
- Thread starter Stephs2125
- Start date
Hey Stephs!!! I’m with you at 7.4. But. The only values that really matter are high and low. Any 7.X is fine. With a vinyl pool CSI is much less of an issue for you than some with plaster that need to target a more specific #.
when you find it’s getting close to out of range, pay a little more attention to it and be prepared to adjust if it keep swinging. The worst that happens if you adjust a little early if you’re color matching skills are a bit off that day.
when you find it’s getting close to out of range, pay a little more attention to it and be prepared to adjust if it keep swinging. The worst that happens if you adjust a little early if you’re color matching skills are a bit off that day.
- Jul 17, 2019
- 4,078
- Pool Size
- 13000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
I call that color 7.good. Once it rises up to be pinkish knock it down to 7.good again with acid.
- Apr 18, 2017
- 86
- Pool Size
- 32000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
- May 3, 2014
- 62,717
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Similar threads
