Help with Goldline Control

Jump to latest Follow Reply
N

NOTAPOOLMAN

Member
Mar 10, 2021
7
The Woodlands TX
Pool Size
25000
Surface
Plaster
Chlorine
Salt Water Generator
Goldline Control 954001A...
Cannot turn off main filter pump/motor without turning off power... pushing off button makes indicator light go off, but not the pump.
All other "circuits" (pool cleaner, waterfalls, etc.) seem to work as they should.
What is the issue? A relay or similar?
Also, the indoor remote stopped working... Showing "Display Error 3"...
Any suggestions would be greatly appreciated. Thanks in advance!
 
Do you feel comfortable removing the front panel to check the relays?

Here is a video of a different system, but they all work the same way and they all use the same relays.


The board sends 24 volts DC to the coil of the relay and the relay button should go up when the relay is on.

The relay button should go back down when the relay is off.

Below are links to buy the relays or you can use an existing relay if you have an extra that's not being used.

G7L-2A-BUBJ-CB DC24 Omron Electronics Inc-EMC Div | Relays | DigiKey

Order today, ships today. G7L-2A-BUBJ-CB DC24 – General Purpose Relay DPST-NO (2 Form A) 24VDC Coil Chassis Mount from Omron Electronics Inc-EMC Div. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
www.digikey.com www.digikey.com

G7L-2A-BUBJ-CB-IN DC24 Omron Electronics Inc-EMC Div | Relays | DigiKey

Order today, ships today. G7L-2A-BUBJ-CB-IN DC24 – General Purpose Relay DPST-NO (2 Form A) 24VDC Coil Chassis Mount from Omron Electronics Inc-EMC Div. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
www.digikey.com www.digikey.com

The top wires are the coil wires.

If you take a spare relay, tape off the coil wires so that they don't contact anything.

Only do what you know you can do safely.
 
Thanks very much for your help...
I determined it was a faulty relay based on the information you provided...
Moved the #8 relay not being used and it works fine now... and ordered a new one as a spare.
NOW I need to determine why my relatively new generic T-15 salt generator is not working...
Reads "very low salt"or "no salt" although actual salt level is 3000...
Again, thanks!
 
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply