Help my dog chewed the wires how much is this going to cost

Welcome to TFP! :wave: Is that a Circupool SWG? If so, look at THIS LINK. The entire flow switch with wire is a bit pricy, but there is also a repair kit, so I'm not sure which you can use. You might give them a call.

Is the plumbing damage from your fur kid as well?
 
Welcome to the forum.

That appears to be a Hayward Aquarite Turbocell.

The following thread may help you create a replacement cord.
 
  • Like
Reactions: Texas Splash
  • 1) Black - Power to cell
  • 2) White - Power to cell
  • 3) Black - Power to cell
  • 4) White - Power to cell
  • 5) Brown - Not used
  • 6) Red - Goes to thermistor
  • 7) Orange - Not used
  • 8) Yellow - Not used
  • 9) Green - Not used
  • 10) Blue - Goes to thermistor.
Brown, orange yellow and green are not used. So you only have to splice 6 wires together. White to white, black to black etc.
 

Enjoying this content?

Support TFP with a donation.

Give Support
Dang! What kind of dog do you have that could have snapped those pipes like that! I had an Akita once that could have done something like that if she wanted too....

If you are handy and do the work yourselves, that’s probably less then $100.00 to repair. It’s honestly an easy fix with some PVC fittings and pvc primer and glue. If you call a plumber though...
 
Last edited:
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.