Pump in question: Pentair SuperFlo VS Variable Speed Pool Pump, 342001
Hello all. Read through numerous post, can’t find my answer, hope you all may assist. Motor has been in operation for 4 years, zero issues untill now. Pump was running at around 2,700 RPM for a couple hours, then noticed the pump turned off. The screen went completely blank, no lights, or anything. Motor is just dead. Still have 240v going to the motor. Took the board off to inspect for any burnt circuits, there were none. No corrosion with the exception of the backup battery. Did notice the underside of the cast aluminum cover has some burn marks/corrosion, but there is no source as to where it came from. I’m thinking it came from manufacture like that. I’ve tried a couple reset methods such as holding 1,2,3, quick clean for several seconds. Tried holding up, down, and #1, and still noting. Anyone have any advice?
Hello all. Read through numerous post, can’t find my answer, hope you all may assist. Motor has been in operation for 4 years, zero issues untill now. Pump was running at around 2,700 RPM for a couple hours, then noticed the pump turned off. The screen went completely blank, no lights, or anything. Motor is just dead. Still have 240v going to the motor. Took the board off to inspect for any burnt circuits, there were none. No corrosion with the exception of the backup battery. Did notice the underside of the cast aluminum cover has some burn marks/corrosion, but there is no source as to where it came from. I’m thinking it came from manufacture like that. I’ve tried a couple reset methods such as holding 1,2,3, quick clean for several seconds. Tried holding up, down, and #1, and still noting. Anyone have any advice?
