I'm attaching current levels of pool and spigot that fills the pool. It is hot here and not raining, so between thst and kids j have to add some water about 2 x a week (done thr bucket test and it was extremely close).
So I need to add water to my pool, the alkalinity is higher than the pool itself and the pool is high. Based on volume of needed water and alkalinity I won't see anything but a .5 increase in ppm of TA. Despite my pH in my tap water being so high (I swear this isn't in legal limit-going to check that), the PH isn't going to have measurable change either.
I have a SWG pool vinyl with "concrete stairs" (plastered and pitting). As to the FC I have been doing a recommended process by Leslies until my K-2006C salt kit came in Saturday. I have added more CYA (still in process now with some in the sock). FC was 5 yesterday and only CYA has been added and I turned the salt cell back on when it was at 5 yesterday.
So I need to add water to my pool, the alkalinity is higher than the pool itself and the pool is high. Based on volume of needed water and alkalinity I won't see anything but a .5 increase in ppm of TA. Despite my pH in my tap water being so high (I swear this isn't in legal limit-going to check that), the PH isn't going to have measurable change either.
I have a SWG pool vinyl with "concrete stairs" (plastered and pitting). As to the FC I have been doing a recommended process by Leslies until my K-2006C salt kit came in Saturday. I have added more CYA (still in process now with some in the sock). FC was 5 yesterday and only CYA has been added and I turned the salt cell back on when it was at 5 yesterday.