wags22's latest activity
-
Wwags22 replied to the thread Two salt cells, no chlorine after hours of runtime.Well, I'm fairly certain my Intellichlor is still working, put it in this morning before the system turned on, have it set for 80%...
-
Wwags22 replied to the thread Two salt cells, no chlorine after hours of runtime.OCLT was 1 ppm. I've put the old cell back in place. What would be an adequate setting and test to determine if it is still functioning?
-
Wwags22 replied to the thread Two salt cells, no chlorine after hours of runtime.Looks like I'm doing another SLAM. Around 3 local time I put in enough liquid chlorine to bring the level to 10 ppm. I test around 630...
-
Wwags22 posted the thread Two salt cells, no chlorine after hours of runtime in Salt Water Chlorine Generators (SWG).Had a Pentair salt cell that flow switch was bad at beginning of season. Replaced flow switch and ran 24 hours and checked chlorine...
-
Wwags22 replied to the thread Clear water but looks like pond foam - is it the filter?.0 chlorine, 30 CYA, hardness was down some, but we have hard water that usually balances it out. I'd dumped in a full gallon of...
-
Wwags22 replied to the thread Clear water but looks like pond foam - is it the filter?.The tab is in the floater, and yes, I added DE after cleaning the grids. BTW - any recommendations for grid cleaner? I've used this...
-
Wwags22 reacted to 1poolman1's post in the thread Clear water but looks like pond foam - is it the filter? with
Like.
Where did you put "a new tab?" Hopefully not the skimmer. One tablet won't make a dent in that much debris in any case. Did you add DE... -
Wwags22 replied to the thread Clear water but looks like pond foam - is it the filter?.Pictures taken today!
-
-
Wwags22 posted the thread Clear water but looks like pond foam - is it the filter? in Pumps, Filters, and Plumbing.I'm in winter conditions and have had a lot of dirt and rain water get in my pool. I put a new tab in and opened up the filter and...
