Recent content by Tommygarry1

  1. Tommygarry1

    Waterfall feature randomly turned on

    Just the pump turns on
  2. Screenshot_20240924-165338.png

    Screenshot_20240924-165338.png

  3. Tommygarry1

    Waterfall feature randomly turned on

    Ah. No actuator on that pump.
  4. Tommygarry1

    Waterfall feature randomly turned on

    Also, to be clear, If I push the Waterfall switch on the indoor panel, control panel, spa side panel, and the app -- it DOES go on and I can shut it off.
  5. Tommygarry1

    Waterfall feature randomly turned on

    Pump was on but NO indicator light for THAT pump was illuminated. Nothing on the app, control panel, indoor panel, or SPA side panel
  6. Tommygarry1

    Waterfall feature randomly turned on

    Hi TFP crew: I have an RS8 Aqualink system and a new iAquaLink that I installed a few months ago that works great! Everything is programmed and has been spot on. TOday I looked down at my pool and noticed the waterfall pump was ON. The weird thing is, there was no light indicator that it was...
  7. Tommygarry1

    AqualinkR8 uograde

    Hi all. Looking to upgrade old system AqualinkR8 to a WiFi system with app. If it as simple as buying the upgrade kit and swapping out the controller ?
  8. Tommygarry1

    CYA

    I just updated my signature and you are correct. I have the 1400. 15 hours...wow. Ok. I did up it to 12. But you're saying that even with CYA at 80, I still need to run the pump for 15 hours at 100% SWG?
  9. Tommygarry1

    CYA

    Passed the OCLT. I guess even with CYA levels of 80 and a SWG on at 100% for 10 hours, a hot sun will do it's dirty work. Feels like it defeats the purpose of continuing to find old socks to add CYA. I read of others keeping their SWG at lower % due to having adequate CYA levels 🤷
  10. Tommygarry1

    CYA

    Hi all - CYA at 80. New Salt cell. Cell working. However, pump on for 10 hours and chlorine still getting eaten up. Went from 4.5ppm to 3 in 3 days. 80 to 85 degree days and my pool temp ranges from 82 to 90. Is this just HIGH demand and maybe add a little supplemental Cal Hypo here and...
  11. Tommygarry1

    Replaced some tile

    Hi all. I replaced some tile in my pool and I'm wondering when I could raise the water level back up. I used a fast setting mortar that the manufacturer says could be used underwater and can be grouted within 2 hours and "traffic" in 4. Thanks for thoughts
  12. Tommygarry1

    Jandy Salt Cell 1400 Code 121

    Well I just learned something new. I thought with ANY service code the cell stopped making chlorine. In any event, I replaced the old one (over 5 years) and new one has not flashed since I first started the system. Interestingly, the place I bought it from said they last 2 years now. Why a 3...
  13. Tommygarry1

    Jandy Salt Cell 1400 Code 121

    I can put the old one that I have and use that as my dummy
  14. Tommygarry1

    Jandy Salt Cell 1400 Code 121

    Fixed. Do you guys take yours off for the winter or leave it on?