Recent content by Thomas89

Noticed the water level was higher up on one side of our pool verse the other side. It's a full 0.5 inch higher on one side than the other. Located in DFW and foundations move drastically during the dry season. We just had a major wet spell the last two weeks. Pool is relatively old and we've...

Hi all, My old swg was dead so I purchased a new Hayward t-15 cell. I've installed the new cell but my readings I'm getting are below: 0, 0, 0 74, 74, 74 31.7, 31.6, 31.6 0.00, 0.00, 0.00 70p, 70p, 70p -0, -0, -0 AL-0, AL-0, AL-0 r1.40, r1.40, r1.40 I have the Taylor salt test kit and I've...

I took the board off to check for any burn marks. Nothing noticeable to the eye. Any other suggestions on why I'm getting 0 amps and salt readings?

After more research I have a Green and Clean T-15 Extended 40,000 salt cell. I don't think they manufacture these anymore as I can only find them on Ebay. Seems to be a cheaper option for salt cells. Will be going to the pool store to get tested to verify if it's dead or not.

Below are three readings I took this morning per your comments. Switching from Auto to Off did not materially differ the readings. 0, 0, 0 81, 82, 82 32.1, 30.6, 30.6 0.00, 0.03, 0.08 89P, 89P, 89P -0, -0, -0 AL-0, AL-0, AL-0 r1.40, r1.40, r1.40 What are the first seven characters of the...

Hi All, I have a t-15 40,000 gallon cell. I just slammed last week and pool is crystal clear and overnight chlorine test passed. Went out of town for the weekend and tested my chlorine tonight. Fc and CC was 0, I tested the salt and got 5400 😬. I added a couple bags prior to leaving as my...

Hi all, I just back washed and rinsed my filter due to a lot of rain the last couple of days. My pumo was flowing fine prior to backwash. No there is no flow going through the pump. The valve is back in the 'fillter' position. Any ideas what's going on?

Hi all, I was removing my SWG to clean it out and the pvc ring that connects it to the pipes snapped. Is this an easy fix or due to the lip on the pvc pipe is this a big project? I've attached some pictures of the broken one and the other side which is fine. Thanks