Recent content by tampabob1

To finish this one I received and replaced the motor and all is working well. Before the motor stopped it was running for a few days but the yellow dial was not moving. I appreciate those that responded.

The motor lists 125V 60HZ. Would I go with a range that includes 115V to.......? Possibly a T103? I have wires going to just 3 terminals as best I can tell. There is the T100 series and the Intermatic firm states it depends on the voltage and number of terminals. I ordered a motor and noticed...

Thanks Bobodaclown. I actually saw those on ebay but wasn't sure if they could be easily removed from the case. Now I know that. I know little about electric so how do I determine the voltage I have? 115 vs 230V? I looked on the timer and all over the enclosure and do not see anything as to...

Thanks. I will check the gears tomorrow. I will let the site know what I find and plans from there.

Thanks ps0303 but not the motor as the gears are still running and I can see that plus hear the motor run. I was hoping it was that as cheaper to replace than the timer part. Could it still be the motor even though all appears to be running? The dial does not move. That is in the proper position...

Thanks. It probably is as the original one from 1994 as I have owned the place since 2003. I have replaced most of the equipment since then.

Thanks Bama Rambler. I will pull it out in a couple of days and see if I can turn all the gears. If I get any other responses will followup as needed. I will just work it manually until after Christmas. Will let you know.

I have a Intermatic mechanical/dial time switch. I don't have the specific manufacturer number but similar as to ones many have. Yellow dial. I have reviewed several postings but they all seem to reflect issues where the motor gears are not running etc. My specific problem is the motor is...