Recent content by ste

No i put a little too much muriat acid and the Ph level went down to 7...so i added some soda to rise it up at 7.2 and i just retested after 30 minuts and seems working ...Ph level is 7.2 now ...can i trust this test?

How long i have to wait after i added bakingsoda to rise Ph levels to test ph again?

I go up to 25FC couse if i do it at 16 FC as recomended it take like 1 week and it never get really clear also becouse bathers, with FC 25 i put a cover on the pool for 2 days ,nobody swim no sun and it works . Taylor k2006 instructions manual says to reach 30FC to slam the pool ,so i...

Hi, i had cloudy water and so i SLAM the pool with CYA at 40 and Ph at 7.2-7.4 with chlorine up to 25FC for 3 days(i slam at 25 becouse i have a solar pump so during SLAM it can works only during the day about 11 hours only) and the water got super clear and clean but after 10 days got...

Hol long. I should keep the cartridge in the TSP solution?

What Tsp? I use the hooze to clean

After 2 years my filter get dirty very fast usually i clean the cartridge once a month but now after a week the pressure get to 22 25 psi.

I know but was raining no stop for 2 weeks and i thought that a 400 ml was just enough......

Ok i try to explain it better ,i was not at home for 1 month and my wife test the pool with k1001 and added about 400 ml of liquid bleach at 12% every day to keep the level above 5ppm ,now i'm back and i bought 0870 and 0871 brand new .... i tested water with k1001 and the color was...

Sorry i tested with k1001 and got 5ppm but with k2006 i got 18ppm

i tested FC for 1 month with K1001 and the color result was always around 5ppm, but when i finally could buy new R-0870 and the big bottle of R-0871 , i added water to 10 ml mark and put 1 big dipper of 0870 and than i had to add 36 drops of R-0871 to get colorless ,doing the math i...

Ok so i also can use it during a SLAM ? That will help a lot if i can use the robot with a FC of 16 with CYA 40 during the sSLAM process at night time ,becouse i have a solar pump and at night doesn'r work so i can put the robot inside instead ? Well if you had it in your pool with FC at 20...

Manual of instruction of the triton say don't use it with FC over 4ppm, but with CYA at 40 i keep the FC level at 7 ppm , minimum 5ppm ....any advice?

i run out of 0871 reagent on my k2006 ,i have 0870 and all the other reagents so i can test CYA ,TA etc etc but not FC over 5ppm and no CC test at all is there a way to test CC only with a k1001 testkit ? and the 0870 salt or something ?

last 2 days was rainy ....so no chlorine loss ,but today is sunny and the pump is running strong ,so FC level sould go down a bit with the sun ? the water looks perfect ....... CYA 40 ... FC around 10 ppm ....... i think is save to swim ?