Recent content by skirt

  1. S

    pump size for dedicated 40 gpm waterfall

    The run from the skimmer to the pump is about 50' and the run from the pump to the waterfall is 45'.
  2. S

    pump size for dedicated 40 gpm waterfall

    What pump size do I need for a dedicated Ricorock waterfall that will work with a minimum 40 gpm flow (waterfall will sheet @ this flow rate, but will handle up to 80 gpm). The waterfall will be supplied by a dedicated skimmer. The supply and return line are both 2" pvc. I'm looking @ an energy...
  3. S

    glue for light niche conduict- electrical or plumming glue??

    What glue should I use for the conduict on the light niche. I know the light niche and conduict will hold water and should be pressure tested. Should I primer and use the electrical glue or use regular pvc plumming glue? Thanks!
  4. S

    What glue to use on skimmer/main drains to pvc

    What brand/type of glue do you guys use on the skmimer and main drains to pvc pipe. The install sheets say use an approved pvc to abs glue. Also what glue do you use on the cpvc jandy/pentair valves to pvc pipe. What works best?? Thanks
  5. S

    DIY pipe sizing and filter

    seever- yes there will be 2 drains (anti-vortex) with one 2" line going to it. I guess I should have given more details.
  6. S

    DIY pipe sizing and filter

    I'm doing a diy vinyl inground pool and have some ?'s. The pool is freeform 36k gallons.I have an intelliflo pump. I plan on the following pipe structure. 2 - 2" skimmer lines 1 - 2" main drain 1 - 2" for 3 step returns (2 on main step/1 on deep end contiur step) 1 - 2" for 2 inpool returns 1 -...
  7. S

    Best sealant for pvc pipe threads

    What's the best sealant to use for pipe threads that are doing to be inground (ie. skimmers/return fittings to pvc pipe). Is teflon tape or pipe dope better. What brands?? Does everyone use the blue glue for pipe to pipe fittings?
  8. S

    jandy vs pentair valves

    Which valves are the best to use. I want to be able to control the water flow thru the valves. The pentair valves have stops that allow you to divert water @ different flow rates. Does the jandy valve allow you to do this (ie. keeping the valve @ half open without the valve slipping back full...
  9. S

    Looking for a 2 inch valve

    Pentair makes one. Check out the site below. "These valves are ideal for diverting, shuting-off, or mixing applications. The Teflon composite diverter seal requires no lubrication. Field-adjustable stops ensure precise positioning while simplifying use, and the extra-wide diverter offers...